Back to Contents Page
Power Button
Dell™ Latitude™ X1 Service Manual
CAUTION:
Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1. Follow the instructions in
"Preparing to Work Inside the
2. Turn the computer over and remove the six M2.5 x 5-mm screws that are not labeled.
3. Remove the keyboard.
4. Remove the
display
assembly.
5. Remove the
memory
shield.
6. Remove the
hard
drive.
7. Remove the
thermal-cooling
8. Remove the
palm
rest.
9. Disconnect the power button cable from the system board.
10. Remove the M2 x 3-mm screw securing the power button to the system board.
11. Lift the power button straight out of the base.
1
M2 x 3-mm screw
2
power button
Back to Contents Page
Computer."
assembly.