Dell Inspiron 3500 Service Manual page 61

Portable computer

Hide thumbs Also See for Inspiron 3500:

Table of Contents

To remove the LCD panel from the EMI pan, see Figure 4-14 and follow these

steps:

1. Remove the display assembly.

2. Remove the bezel.

3. Remove the LCD interior assembly.

4. Remove the panel rails.

5. Remove (and save for installation) the Kapton tape from the lower right cor-

ner of the LCD interior assembly.

NOTE: When removing the EMI tape, hold each end of the tape at all

times. If one end is released, the tape will curl and stick to itself.

6. Remove (and save for installation) the EMI tape from the side and the bot-

tom of the LCD interior assembly.

7 . Remove (and save for installation) any other Kapton or EMI tape securing

the LCD cable to the EMI pan.

8. Lift the LCD panel out of the EMI pan. The LCD FPC cable remains inside

the EMI pan, held in place by Kapton tape.

RQO\

Removing and Replacing Parts

4-25

Show Quick Links

Table of Contents