Dell Inspiron 3500 Service Manual page 59

FLH 2 x 4 (4) 1.5–1.8 kgf-cm
To remove the panel rails, see Figure 4-14 and follow these steps:
1. Remove the display assembly.
2. Remove the bezel.
3. Remove the LCD interior assembly.
4. Remove the LED cable from the right panel rail (optional).
NOTE: Note the routing of the LED cable through the right panel rail for
installation.
5. Remove the two 4-mm screws securing the left panel rail to the side of the
LCD panel.
6. Remove the left panel rail. It is stamped with an L (left) for easy
identification.
7 . Remove the two 4-mm screws securing the right panel rail to the side of
the LCD panel.
8. Remove the right panel rail. It is stamped with an R (right) for easy
identification.
During installation, the rails must fit snugly against the LCD panel so the inte-
rior assembly will fit inside the back cover.
RQO\
Removing and Replacing Parts 4-23