Problems With Hardware; Problems With Software - Creative Sound Blaster User Manual

Problems With
Hardware
Problems with
Software
5. Double-click the DVD/CD-ROM drives icon.
Your computer drives will appear.
6. Right-click the disk drive icon.
A menu will appear.
7. Click Properties.
8. In the Digital CD Playback box of the next dialog box, click the Enable digital CD audio for this
CD-ROM device check box to select it.
Unable to record or transfer CD audio tracks from CD-ROM/DVD-ROM to MiniDisc recorder, using the
Creative MiniDisc application.
Enable digital CD playback. For more information, refer to the topic, "No audio output when playing
audio CDs." on page B-4.
Your Sound Blaster is not detected or is not functioning properly.
Unplug and plug the USB cable from your computer or notebook to reset Your Sound Blaster.
Your Sound Blaster does not function properly when used with a USB 2.0 hub connected to your computer or
notebook equipped with a USB 2.0 port.
Check for information availability at http://www.creative.com.
The Dolby Digital 5.1 or DTS pass-through via SPDIF (Optical Out) feature is not available.
Check that the Digital/Analog switch is set to Digital Only mode. Dolby Digital 5.1 or DTS pass-through
via SPDIF (Optical Out) is only available in Digital Only mode.
EAX and CMSS 3D effects are not working when connecting related peripherals to the Line In connector.
EAX and CMSS 3D effects are not available for Line In.
Troubleshooting B-5