Connecting Microphones; Connecting Headphones - Creative Sound Blaster User Manual

Connecting
Microphones
Connecting
Headphones
¼
Use a " to 3.5 mm adapter for
headphones or microphones with ¼ "
plugs.
Adjusting Headphones
Volume
You can connect a condenser microphone, usually fitted with a 3.5 mm plug, to Your Sound Blaster.
You can connect personal stereo headphones, usually fitted with a 3.5 mm stereo plug, such as those used
for portable audio players, to Your Sound Blaster.
Note:
When headphones are plugged in, speaker output is muted. Headphones volume is controlled by the
headphones volume control, see Adjusting Headphones Volume below.
The volume output to the Headphones jack is a combination of the mixer output volume from the system,
and the Headphones Volume control on Your Sound Blaster. You can adjust the headphones volume by
using the Headphones Volume Control or Creative Surround Mixer.
Figure 2-7:
Using the Headphones Volume control:
❑ Left to decrease the headphones volume.
❑ Right to increase the headphones volume.
Headphones Volume Control.
Installing Your Sound Blaster 2-6