Operation; Turning The Power On; To Set To The Standby Mode; Loading And Ejecting Discs - Pioneer XDJ-R1 Operating Instructions Manual

Operation

Turning the power on

1 Make all the connections, then plug the power cord
into a power outlet.
= Connections (p.10)
2 Press the [STANDBY/ON] button.
The [STANDBY/ON] indicator lights green.

To set to the standby mode

When this unit's power is on, press the [STANDBY/ON]
button for over 1 second.
This unit is set to the standby mode.
The [STANDBY/ON] indicator lights red.
! When the [STANDBY/ON] button is pressed again, the power turns
on.
! This unit is equipped with an auto standby function. For details, see
About the auto standby function on page 24.
! Do not disconnect the USB device or turn off this unit's power while
the USB indicator is lit or flashing. Doing so could delete this unit's
management data and damage the USB device, making it impos-
sible to read.

Loading and ejecting discs

! This unit is a one-disc player. Do not insert multiple disc.
! Do not force discs into the disc insertion slot when this unit's power
is off. Doing so could damage the disc and lead to malfunction of
this unit.
Inserting discs
Insert the disc horizontally into the disc insertion slot,
with the printed surface facing up.
Playback starts after the medium's information has been read.
! When a disc containing music files recorded with a hierarchical
structure is loaded, playback starts from the tracks in the uppermost
layer.
! When auto cue is turned on, the disc pauses at the audio start posi-
tion. In this case, press the [PLAY/PAUSEf] to start playback.
For details on auto cue, see Setting auto cue on page 18.
Ejecting discs
1 Press the [f (PLAY/PAUSE)] button during
playback, or if a cue point is set, press the [CUE] button
during playback (back cue), then press the [DISCh]
button to eject the disc.
When the button is pressed, disc rotation stops and the disc comes out
of the disc insertion slot.
2 Pull the disc out, being careful not scratch its signal
surface.
! If the [DISCh] button is pressed accidentally, press the
[PLAY/PAUSEf] button immediately. Disc ejection is canceled
and the unit is reset to as it was directly before the [DISCh] button
was pressed. (No sound is output during the resetting process.)
CAUTION
When the disc is being drawn in or ejected, do not apply any force to
the disc in the direction opposite its movement. Doing so could dam-
age the disc or this unit.
 About the resume function
If a disc is ejected while paused then that same disc is reinserted, the
disc pauses at the playback position it was at when it was ejected. This
position is stored in the memory until the unit's power is turned off or a
different disc is loaded.
! This function does not work with storage devices (USB).
21
En