Start Up The System; Operation - Pioneer DDJ-WeGO4-W Operating Instructions Manual

AC adapter (included)
Power cord (included)
To power outlet

Start up the system.

1 Turn on the power of the iPhone / iPad.
2 Press the [STANDBY/ON] button of this unit to turn
on the power of the unit.
After the startup illumination ends, the unit is ready for use.
3 Turn on the power of the device (speakers with
built-in amplifier, power amplifier, etc.) connected to the
output terminals.
4 Launch WeDJ for iPhone / iPad.

Operation

Loading tracks into a deck
The following describes the procedure for loading tracks into deck 1 (left
side) as an example.
1 Turn the rotary selector to switch to the browse
screen.
2 Turn the rotary selector to move the cursor to
[TRACKS] in the browse screen.
3 Press the rotary selector to move the cursor to the
track list.
! If the rotary selector is pressed while pressing the [SHIFT] button,
the cursor moves to the [TAG LIST] / [TRACKS] / [PLAYLISTS] /
[ARTISTS] / [ALBUMS] / [REC LIST] / [HISTORY] selection areas in
the browse screen.
4 Turn the rotary selector to select a track in [TRACKS]
and then press the [LOAD] button of deck 1 (left side).
The track is loaded into the deck.
DC plug
Playing a music file
The following describes the procedure for outputting the sound of deck 1
(left side) as an example.
1 Set the positions of the controls, etc., as shown
below.
Names of controls, etc.
EQ (HI, LOW) controls
FILTER control
Channel fader
MASTER LEVEL control
Crossfader
2 Press the [PLAY/PAUSEf] button to play the track.
3 Move the channel fader away from you.
4 Turn the [MASTER LEVEL] control to adjust the audio
level of the speakers.
Adjust the audio level output from the [MASTER] output terminals to an
appropriate level.
Sound is output from the speakers.
Position
Center
Center
Moved forward
Turned fully counterclockwise
Center
En
9