Hitachi C47-WD8000 Instruction Manual page 39

Rear projection color tv
Hide thumbs Also See for C47-WD8000:
Table of Contents

Advertisement

BRIDGE MEDIA FUNCTION
When browsing a photo in full screen, you may change the photo using the
up/down buttons or number buttons. If you press the ENTER button, it will return to 16-photo mode.
While displaying the photo, press the TV/PHOTO button to switch photo display mode to TV mode.
While displaying the photo, press the RETURN button to return to 16-photo mode.
In the 16-photo mode, press the TV/PHOTO once more to switch 16-photo mode to 16-motion-picture list mode,
and a
symbol will appear on left top of the screen for a while. Refer to "6.To use motion picture display
function" for more information.
In the 16-photo mode, press the RETURN button to switch 16-photo display mode to TV mode.
2) ROTATE FUNCTION
1 While displaying one photo in full screen, press the ROTATE button to rotate the photo to 0 , 90 ,
180 or 270 . The symbol such as
for a while.
2 In 16-photo mode, select the photo you wish to rotate and press the ROTATE button to display a
on the lower left corner. Press the ROTATE button continuously to rotate the selected photo
180 , 270
3) SLIDE SHOW FUNCTION
1 Follow the steps on page 22 to set the Slide Interval among 5sec, 10sec and 30sec.
2 In photo display mode, press the SLIDE SHOW button to scroll the photos starting from the first one or
current photo (refer to page 22 on the Slide Mode explanation) at fixed slide intervals.
3 Press the ENTER button to stop slide show, and a
If the ENTER button is pressed, the TV will return to slide show mode.
If there is not operation within one minute, the TV will return to slide show mode automatically.
4 After finishing the slide show, the TV will return to 16-photo mode.
5 In the process of slide show, the Rotate function is not available.
6 In the process of slide show, press the TV/PHOTO button to switch slide show mode to TV mode.
4) OTHER FUNCTIONS
In photo mode, there are other functions such as
Background, Slide Mode and Slide Music, please refer to
page 22.
6.To use motion picture display function:
1) ENJOY MOTION PICTURE
In the 16-photo mode, press the TV/PHOTO button once
more to switch 16-photo mode to 16-motion-picture list
(thumbnail) mode. A
top of the screen for a while and the first sixteen motion
pictures' thumbnail will be shown on the screen. (If the
motion pictures stored in the memory card are less than 16,
the TV will display the motion pictures available only.)
Press the Page up/down buttons to show the next page of
thumbnail. Select one photo in thumbnail using the
cursor buttons (or number buttons), the frame of the
selected thumbnail will be indicated in green. Press the
ENTER button to play the selected motion picture as
shown on the right. It will return to 16-motion-picture list
mode after finishing playing.
Note: In 16-motion-picture list mode, if a
appears on a thumbnail, it means that the audio
format of this motion picture cannot be supported.
If a
symbol appears on a thumbnail, it means that
this motion picture cannot be played.
When enjoying motion picture, press the RETURN button
to return to 16-motion-picture list mode. If you press the
RETURN button once more, it will return to 16-photo
mode.
When enjoying motion picture, press the TV/PHOTO button to switch motion picture mode to TV mode.
.
symbol will appear on the left
0
is displayed on the lower left corner of the screen accordingly
symbol
39
cursor buttons, the Program
will appear on the lower left side.
No. 1/ 4
05/05/28
0
0 , 90 ,

Advertisement

Table of Contents
loading

This manual is also suitable for:

C57-wd8000

Table of Contents