Table of Contents
Advertisement
ON-SCREEN DISPLAY MENU SETUP MENU
7
The Sound System option in the Tuning menu allows
you to select between various sound systems i.e. Auto,
4.5, 5.5, 6.0 or 6.5 (Note: Here the unit MHz is omitted.).
Press the
cursor buttons to select the Sound System
option then press the
desired sound systems as shown on the right.
Auto is recommended, as this will automatically determine
what system is being broadcast.
Note: This option is valid only for RF signal from antenna.
8
The Color System option in the Tuning menu allows
you to select different color systems i.e. Auto, PAL,
SECAM, NTSC4.43 or NTSC3.58.
Press the
cursor buttons to select the Color System
option, then press the
desired color systems as shown on the right.
Auto is recommended, as this will automatically determine
what system is being broadcast. However, some weak
broadcast signals might cause incorrect judgment by the
TV and it may become necessary to allocate a particular
system to that program number.
Note: Please set Color System to Auto when receiving signal without color burst.
9
Program Name in the Tuning menu allows you to
assign a name for each channel. The detail steps are shown
below:
Press the
cursor buttons to select the Program
Name option, then press the
letter to be changed from the left to right. When the letter is
selected, press the
letter.
When you select a channel that has been named, the
channel No., name and other information will appear on the
top right corner of the screen. Also, you can press the
RECALL button to display the same information.
Notes
(1) The letters above include 39 letters such as *,
(2) When [
(3) Try to avoid using all spaces to name the program.
cursor buttons to select the
cursor buttons to select the
cursor button to select the
cursor buttons to select the desired
] appears in the Program Name, this implies that the channel is not named.
, SPACE, 0-9, A-Z, etc.
25
Advertisement
Table of Contents
