Table of Contents
Advertisement
ON-SCREEN DISPLAY MENU SETUP MENU
4
Press the ENTER button to enter the Tuning menu as
shown on the right.
Press the
cursor buttons to select Tuning Mode.
Select the channel receiving mode in your region using
the
cursor buttons. For example, in Singapore,
please select CCIR on the menu.
Note:
If without CCIR and China, you can select Freq. to
tune.
5
Press the
cursor buttons to select the Program
Number option as shown on the right.
Choose a particular program number by pressing the
cursor buttons or directly enter the program number buttons,
for example,001,002
button to select the Search option. Press the
button, the TV will begin searching automatically forward
(high frequency) or backward (low frequency) until adjacent
broadcast is found. You can continue to press the
cursor button to search the channel until the desired channel
is available.
In this way, you can manually select the desired program
easily. Also, you can receive programs from RF output terminal of some equipment.
In addition, you can receive AV program using a particular Program Number. Select the Search option and
press the TV/VIDEO button on the remote control unit to select AV1, AV2, etc. If you do not want to preset AV
program, please press the ENTER button on the remote control unit to quit the AV program setting.
6
Select Skip using the
the right. The Skip option in the menu allows you to skip
those programs you do not like, for example, some repeated
programs or programs with weak signal, etc. When Skip
option is set to On using the
skip these programs automatically if you are to select the
channels by the Program up/down buttons.
Skipped program numbers can still be selected by entering
the respective number buttons.
You can access the menu to reset the Skip option.
199,etc.Then press the
or
cursor buttons as shown on
cursor buttons, it will
cursor
cursor
or
24
Advertisement
Table of Contents
