Standby Channel Update; Dvb Character Set; Dynamic Scan; Location Setting - Toshiba Regza WL75 Digital Series Manual

SETTING UP YOUR TV
Move
— Press the GREEN button to activate the
Move feature. Use the
channel you wish to move and press
If you wish to move multiple channels at once, select
another channel and check in the same way. Repeat as
necessary.
Once all desired channels have been checked, use the
B b
or buttons to place the focus at the position to
which you wish to move the channels. The channels
will be inserted above the highlighted channel. Press
the GREEN button to execute the move.
Channels
Line No. 1/10
Pos. Name
1 ABC ONE
2 ABC TWO
7 ABC THREE
30 CABC Channel
40 ABC NEWS 24
51 ABCi
822 AA
823 AC
Sort
— Press the YELLOW button. A confirmation
window will appear. Press
Q
press .
Sort
Your existing channel order will be lost. Do you wish to
continue?
The Sorting Type selection window will appear.
Sort
Sorting Type
C c
Press or to set the sorting type.
A - Z
Channel Number Position No. order (numerical
b
Press to highlight Sort and press

Standby Channel Update

If the Standby Channel Update is set to On, when the TV is in
standby mode, Digital Tuning is automatically executed and any
new channels are saved.
a
Select DTV Settings from the SETUP menu and press
Q
.
b
b
Press to select Standby Channel Update and use
C c
or to select On.
B b
or buttons to select the
Q
to check.
TV
C c
or to select Yes and
Yes
A - Z
Sort
Station name order (A to Z)
sequence)
Q
.

DVB Character Set

This feature allows you to manually select the character set
(Standard = Table 0, West = Table 5 or Latin alphabet 9)
to be used for DVB-C or DVB-T channels.
a
Select DTV Settings from the SETUP menu and press
Q
.
b
b
Press to select DVB Character Set and use
to select Standard, West or Latin alphabet 9.

Dynamic Scan

If the broadcast information has changed in your DVB-T
receiving area, the TV screen will display the message
"Broadcast information has changed. Would you like to
rescan now?". Please follow the message. If you do not wish
for the TV to detect changes and prompt you to rescan, you
should set this feature to "Off".
a
Select DTV Settings from the SETUP menu and press
Q
.
b
b
Press to select Dynamic Scan and use
select On.

Location setting

You can select either Home or Store mode. Home is
recommended for normal home use. Select Store when using
the television for displaying in a shop, etc.
a
Select Location from the SETUP menu.
b
C c
Press or to select Home or Store.

Analogue switch-off

This is a digital television which is integrated to allow the use
of both digital and analogue services. However, during the
lifetime of this set it is very likely that analogue services will
be switched off to allow for more new digital services.
This 'switch-off' will happen in a number of phases, which will
be advertised in your area well in advance. It is recommended
that at each phase the television is re-tuned to ensure that
existing and new digital services can be viewed without
disruption.
20
C c
or
C c
or to