Active Backlight Control; Black/White Level; Static Gamma; Mpeg Nr - Noise Reduction - Toshiba Regza WL75 Digital Series Manual

Active Backlight Control

When Active Backlight Control is activated, it will
automatically optimize the backlighting levels for dark scenes.
a
In the Advanced Picture Settings menu, press
select Active Backlight Control.
b
C c
Press or to select On or Off.

Black/White Level

Black/White Level increases the strength of dark areas of the
picture to improve the definition.
a
In the Advanced Picture Settings menu, press
select Black/White Level.
b
C c
Press or to adjust the level. The effect depends on
the broadcast and is most noticeable on dark colours.

Static Gamma

The static gamma feature allows you to adjust the levels of black
in the picture.
a
In the Advanced Picture Settings menu, press
select Static Gamma.
b
C c
Press or to adjust the level.
MPEG NR – Noise Reduction
When watching a DVD, the compression may cause some words
or picture elements to become distorted or pixelated.
Using the MPEG NR feature reduces this effect by smoothing
out the edges.
a
In the Advanced Picture Settings menu, press
select Noise Reduction and press
b
b
Press to select MPEG NR.
Noise Reduction
MPEG NR
DNR
c
C c
Press or to select Low, Middle, High or Off to
suit your preference.
DNR allows you to 'soften' the screen representation of a weak
a
b
to
b
The Resolution+ feature allows you to adjust the clarity levels
b
to
a
b
b
c
to
NOTE:
• This feature may not work properly depending on the
content.
• Adjustable range varies according to the Picture Mode you
set.
• Noise may appear in the picture depending on the device
connected to the TV (e.g. a device with a specific enhancer
function).
b
to
Q
.
This feature will reduce picture blur without decreasing image
a
Low
Auto
b
NOTE: When Picture Mode is set to Game, this feature will
be grayed out and automatically set to Off.
29
CONTROLS AND FEATURES
DNR – Digital Noise Reduction
signal to reduce the noise effect.
Select DNR from the Noise Reduction menu.
C c
Use or to select Low, Middle, High, Auto or Off.
The differences may not always be noticeable (for the
best result use lower settings as picture quality can be
lost if the setting is too high).

Resolution+

for your desired picture settings.
In the Advanced Picture Settings menu, press
select Resolution+ and press
In the Resolution+ field, select On.
Resolution+
Resolution+
Level
b
Press to highlight Level, and then press
adjust the level.

Active Vision M200 Pro

brightness, or adding flicker.
In the Advanced Picture Settings menu, press
select Active Vision M200 Pro.
C c
Press or to select On or Off.
b
to
Q
.
On
3
C c
or to
b
to