Appendix C: Upgrading Firmware; Figure C-1: Upgrade Firmware Screen - Cisco LINKSYS WVC54GC User Manual

Compact Wireless-G Internet Video Camera

Appendix C: Upgrading Firmware

NOTE: Linksys recommends that you upgrade the Camera's firmware within your network; in other
words, use a computer within the Camera's local network. If you attempt to upgrade the Camera's
firmware from a remote location—using a computer outside of the Camera's local network—the
upgrade will fail.
The Camera's firmware is upgraded through the Web-based Utility's Administrator tab. Follow these instructions:
To upgrade the firmware, follow these instructions:
1. Go to www.linksys.com and download the firmware upgrade file for the Camera. Then extract the file.
2. Click the Upgrade Firmware button on the Administrator screen.
3. On the Upgrade Firmware screen, click the Browse button to find the extracted file, and then double-click it.
4. Click the Start Upgrade button, and follow the on-screen instructions. To cancel the upgrade, click the
Cancel button. For further help, click the Help tab.
Appendix C: Upgrading Firmware

Figure C-1: Upgrade Firmware Screen

69