Chapter 5: Setting Up And Mounting The Compact Wireless-G Internet Video Camera; Setup Wizard; Figure 5-1: Setup Wizard - Welcome Screen; Figure 5-2: End User License Agreement Screen - Cisco LINKSYS WVC54GC User Manual

Compact Wireless-G Internet Video Camera
Chapter 5: Setting up and Mounting the Compact
Wireless-G Internet Video Camera

Setup Wizard

The Compact Wireless-G Internet Video Camera Setup Wizard will guide you through the installation and
configuration procedure.
1. Insert the Setup CD-ROM into your CD-ROM drive. The Setup Wizard should run automatically, and the
Welcome screen should appear. If it does not, click the Click Here to Start button and choose Run. In the
field provided, enter D:\wvc54gc.exe (if "D" is the letter of your CD-ROM drive).
Setup. Click the Click Here to Start button to begin the installation process.
Install Viewer & Recorder Utility. To install the Camera's Multi-Camera Viewer & Recorder Utility on your
PC, click
this button.
Setup SoloLink DDNS Service. Click the Setup SoloLink DDNS Service button to configure and use
Linksys's Dynamic Domain Name System (DDNS) service.
User Guide. Click this button to open the PDF file of this User Guide.
Exit. Click the Exit button to exit the Setup Wizard.
2. To install the Camera, click the Click Here to Start button on the Welcome screen.
3. After reading the License Agreement, click Next if you agree and want to continue the installation, or click
Cancel to end the installation.

Chapter 5: Setting up and Mounting the Compact Wireless-G Internet Video Camera

Setup Wizard

Figure 5-1: Setup Wizard - Welcome Screen

Figure 5-2: End User License Agreement Screen

10