Chassis intrusion Connector: JCi
this connector connects to the chassis intrusion switch cable. if the chassis is
opened, the chassis intrusion mechanism will be activated. the system will record
this status and show a warning message on the screen. to clear the warning, you
must enter the BioS utility and clear the record.
Parallel Port Header: JLPt
this connector is used to connect an optional parallel port bracket. the parallel
port is a standard printer port that supports enhanced Parallel Port (ePP) and
extended Capabilities Parallel Port (eCP) mode.
aPS Led Status indicator: Led2
these aPS (active Phase Switching) Led indicates the current CPu power phase
mode. Follow the instructions below to read.
on
the Led will light when CPu is in 2 or 3 phase power mode.
oFF
the Led will off when CPu is in phase power mode.
Led2
MS-7592
9