MSI G41TM-S01 Series Manual
  1. Manuals
  2. Brands
  3. MSI Manuals
  4. Motherboard
  5. G41TM-S01 Series
  6. Manual
MSI G41TM-S01 Series Manual

MSI G41TM-S01 Series Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

G41TM-S01 seres
MS-7602 (v1.x) Manboard

G52-76021X4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the G41TM-S01 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for MSI G41TM-S01 Series

Summary of Contents for MSI G41TM-S01 Series

  • Page 1 G41TM-S01 seres MS-7602 (v1.x) Manboard G52-76021X4...
  • Page 2 Alternatvely, please try the followng help resources for further gudance. ◙ Vst the MSI webste for FAQ, techncal gude, BIOS updates, drver updates, and other nformaton: http://www.ms.com/ndex.php?func=servce ◙ Contact our techncal staff at: http://ocss.ms.com...

  • Page 3: Safety InstructOns

    MS-7602 Safety Instructons ￭ Always read the safety nstructons carefully. ￭ Keep ths User’s Manual for future reference. ￭ Keep ths equpment away from humdty. ￭ Lay ths equpment on a relable flat surface before settng t up. ￭ The openngs on the enclosure are for ar convecton hence protects the equpment from overheatng.

  • Page 4: Fcc-B RadO Frequency Interference Statement

    ▍ Preface FCC-B Rado Frequency Interference Statement Ths equpment has been tested and found to comply wth the lmts for a Class B dg- tal devce, pursuant to Part 15 of the FCC Rules. These lmts are desgned to provde reasonable protecton aganst harmful nter- ference n a resdental nstallaton.

  • Page 5: Weee (Waste ElectrCal And ElectronC EquPment) Statement

    MSI wll comply wth the product take back requrements at the end of lfe of MSI-branded prod- ucts that are sold nto the EU.
  • Page 6 MSI će poštovat zahtev o preuzmanju ovakvh prozvoda kojma je stekao vek trajanja, koj maju MSI oznaku  koj su prodat u EU. Ove proz- vode možete vratt na lokalnm mestma za prkupljanje.
  • Page 7  produttor d dett materal saranno obblgat a rtrare ogn prodotto alla fine del suo cclo d vta. MSI s adeguerà a tale Drettva rtrando tutt  prodott marchat MSI che sono stat vendut all’nterno dell’Unone Europea alla fine del loro...

  • Page 8: Table Of Contents

    ▍ Preface ▍ Contents Copyrght Notce ....................  Trademarks .................... Revson Hstory.....................  Techncal Support.................. Safety Instructons .................. FCC-B Rado Frequency Interference Statement.......... v WEEE (Waste Electrcal and Electronc Equpment) Statement ....v Chapter 1 Gettng Started................1-1 Manboard Specficatons ..................1-2 Manboard Layout ....................
  • Page 9 MS-7602 Appendx A Realtek Audo ................A-1 Installng the Realtek HD Audo Drver ..............A-2 Software Configuraton ..................A-4 Hardware Setup ....................A-19 Appendx B Overclockng Center..............B-1 Actvatng Overclockng Center ................B-2 System Info ......................B-3 DOT ........................B-4...

  • Page 11: Chapter 1 GettNg Started

    Chapter 1 Gettng Started Thank you for choosng the G41TM-S01 Seres (MS- 7602 v1.X) Mcro-ATX manboard. The G41TM-S01 Seres manboards are based on Intel G41 & ICH7 ® chpsets for optmal system efficency. Desgned to fit the advanced Intel Core™2 Quad/ Intel Core™2 Duo/ ®...
  • Page 12 ▍ ▍ Gettng Started Gettng Started ainboard pecificationS Processor Support ■ Intel Core™ 2 Quad/ Core™ 2 Duo/ Pentum E-seres/ Celeron E-seres/ Celeron ® ® ® ® 4-seres processors n the LGA775 package (For the latest nformaton about CPU, please vst http://www.ms.com/ndex.php?func=cpuform2) Supported FSB ■...
  • Page 13 MS-7602 MS-7602 Slots ■ 1 PCI Express x1 slot ■ 1 PCI Express x16 slot ■ 2 PCI slots ■ Support 3.3V/ 5V PCI bus Interface Form Factor ■ Mcro-ATX (24.4cm X 23.0cm) Mountng ■ 6 mountng holes If you need to purchase accessores and request the part numbers, you could search the product web page and find detals on our web address below http://www.ms.com/ndex.php...

  • Page 14: MaNboard Layout

    ▍ ▍ Gettng Started Gettng Started ainboard ayout Top : mouse Bottom: keyboard Top: VGA port Bottom:DVI-D port USB ports Intel Top: LAN Jack Bottom: USB ports Line-In Line-Out T:RS-Out M:CS -Out B:SS-Out PCI_E1 BATT PCI_E2 PCI1 Intel ICH7 PCI2 JUSB1 JUSB2 JAUD1...
  • Page 15 MS-7602 MS-7602 acking heckLiSt MSI Drver/Utlty DVD MSI manboard SATA Cable (Optonal) User’s Gude USB Bracket (Optonal) Power Cable Back IO Sheld * The pctures are for reference only and may vary from the packng contents of the product you purchased.

  • Page 17: Chapter 2 Hardware Setup

    Chapter 2 Hardware Setup Ths chapter provdes you wth the nformaton about hardware setup procedures. Whle dong the nstalla- ton, be careful n holdng the components and follow the nstallaton procedures. For some components, f you nstall n the wrong orentaton, the components wll not work properly.
  • Page 18 ▍ ▍ Hardware Setup Hardware Setup uick oMponentS uide JPWR1, p.2-9 CPU, p.2-3 CPUFAN1, p.2-13 DDR2, p.2-7 Back Panel, p.2-10 JPWR2, p.2-9 PCIE, p.2-17 JCI1, p.2-13 SATA1~4, p.2-13 PCI, p.2-17 JBAT1, p.2-16 SYSFAN1, p.2-13 JUSB1 ~2 , p.2-14 JFP1, JFP2, p.2-12 JSP1, p.2-15 JTPM1, p.2-15 JAUD1, p.2-14...

  • Page 19: Cpu (Central ProcessNg UnT)

    MS-7602 MS-7602 cpu (c entraL roceSSing When you are nstallng the CPU, make sure to nstall the cooler to prevent overheatng. If you do not have the CPU cooler, consult your dealer before turnng on the computer. For the latest nformaton about CPU, please vst http://www.ms.com/ndex. php?func=cpuform2 Important Overheatng...
  • Page 20 ▍ ▍ Hardware Setup Hardware Setup CPU & Cooler Installaton When you are nstallng the CPU, make sure the CPU has a cooler attached on the top to prevent overheatng. Meanwhle, do not forget to apply some thermal paste on CPU before nstallng the heat snk/cooler fan for better heat dsperson.
  • Page 21 MS-7602 MS-7602 Lft the load lever up and open the After confirmng the CPU drecton for load plate. correct matng, put down the CPU n the socket housng frame. Be sure to grasp on the edge of the CPU base. Note that the algnment keys are matched.
  • Page 22 ▍ ▍ Hardware Setup Hardware Setup Press down the load lever lghtly onto Algn the holes on the manboard wth the load plate, and then secure the the heatsnk. Push down the cooler lever wth the hook under retenton untl ts four clps get wedged nto the tab.

  • Page 23: Memory

    MS-7602 MS-7602 eMory These DIMM slots are used for nstallng memory modules. For more nformaton on compatble components, please vst http://www.ms.com/ndex.php?func=testreport DDR2 240-pn, 1.8V 64x2=128 pn 56x2=112 pn Dual-Channel mode Populaton Rule In Dual-Channel mode, the memory modules can transmt and receve data wth two data bus lnes smultaneously.
  • Page 24 ▍ ▍ Hardware Setup Hardware Setup Installng Memory Modules The memory module has only one notch on the center and wll only fit n the rght orentaton. Insert the memory module vertcally nto the DIMM slot. Then push t n untl the golden finger on the memory module s deeply nserted n the DIMM slot.

  • Page 25: Power Supply

    MS-7602 MS-7602 ower uppLy ATX 24-pn Power Connector: JPWR2 Ths connector allows you to connect an ATX 24-pn power supply. To connect the ATX 24-pn power supply, make sure the plug of the power supply s nserted n the proper orentaton and the pns are algned.

  • Page 26: Back Panel

    ▍ ▍ Hardware Setup Hardware Setup aneL Mouse VGA Port Lne-In RS-Out Lne-Out CS-Out Keyboard USB Ports SS-Out DVI-D Port ▶ Mouse/Keyboard The standard PS/2 mouse/keyboard DIN connector s for a PS/2 mouse/keyboard. ® ® ▶ VGA Port The DB15-pn female connector s provded for montor. ▶...
  • Page 27 MS-7602 MS-7602 ▶ Audo Ports These audo connectors are used for audo devces. It s easy to dfferentate between audo effects accordng to the color of audo jacks. ■ Lne-In (Blue) - Lne In, s used for external CD player, tape-player or other audo devces.

  • Page 28: Connectors

    ▍ ▍ Hardware Setup Hardware Setup onnectorS Seral ATA Connector: SATA1~4 Ths connector s a hgh-speed Seral ATA nterface port. Each connector can connect to one Seral ATA devce. Important • Please do not fold the Seral ATA cable nto 90-degree angle. Otherwse, data loss may occur durng transmsson.
  • Page 29 MS-7602 MS-7602 Fan Power Connectors: CPUFAN1, SYSFAN1 The fan power connectors support system coolng fan wth +12V. When connectng the wre to the connectors, always note that the red wre s the postve and should be con- nected to the +12V; the black wre s Ground and should be connected to GND. If the manboard has a System Hardware Montor chpset on-board, you must use a specally desgned fan wth speed sensor to take advantage of the CPU fan control.
  • Page 30 ▍ ▍ Hardware Setup Hardware Setup Front USB Connector: JUSB1 / JUSB2 Ths connector, complant wth Intel I/O Connectvty Desgn Gude, s deal for con- ® nectng hgh-speed USB nterface perpherals such as USB HDD, dgtal cameras, MP3 players, prnters, modems and the lke. USB 2.0 Bracket (optonal) Important Note that the pns of VCC and GND must be connected correctly to avod possble...
  • Page 31 MS-7602 MS-7602 TPM Module connector: JTPM1 Ths connector connects to a TPM (Trusted Platform Module) module (optonal). Please refer to the TPM securty platform manual for more detals and usages. S/PDIF-Out Connector: JSP1 (for HDMI graphcs card only) Ths connector s used to connect S/PDIF (Sony & Phlps Dgtal Interconnect Format) nterface for dgtal audo transmsson to the HDMI graphcs card.

  • Page 32: Jumpers

    ▍ ▍ Hardware Setup Hardware Setup uMperS Clear CMOS Jumper: JBAT1 There s a CMOS RAM onboard that has a power supply from an external battery to keep the data of system configuraton. Wth the CMOS RAM, the system can automat- cally boot OS every tme t s turned on.

  • Page 33: Slots

    MS-7602 MS-7602 LotS PCI (Perpheral Component Interconnect) Express Slot The PCI Express slot supports the PCI Express nterface expanson card. PCI Express x16 Slot PCI Express x1 Slot PCI (Perpheral Component Interconnect) Slot The PCI slot supports LAN card, SCSI card, USB card, and other add-on cards that comply wth PCI specficatons.

  • Page 34: Led Status IndCators

    ▍ Hardware Setup Led S tatuS ndicatorS APS LEDs APS LEDs These APS (Actve Phase Swtchng) LEDs ndcate the current CPU power phase mode. Follow the nstructons below to read. : ON, : OFF 3 of the LEDs wll lght blue when CPU s n 3 phase power mode. 2 of the LEDs wll lght blue when CPU s n 2 phase power mode.

  • Page 35: Chapter 3 Bios Setup

    Chapter 3 BIOS Setup Ths chapter provdes nformaton on the BIOS Setup program and allows you to configure the system for op- tmum use. You may need to run the Setup program when: ■ An error message appears on the screen durng the system bootng up, and requests you to run SETUP.

  • Page 36: EnterNg Setup

    ▍ BIOS Setup ▍ BIOS Setup ntering etup Power on the computer and the system wll start POST (Power On Self Test) process. When the message below appears on the screen, press <DEL> key to enter Setup. Press DEL to enter SETUP If the message dsappears before you respond and you stll wsh to enter Setup, restart the system by turnng t OFF and On or pressng the RESET button.
  • Page 37 MS-7602 MS-7602 Control Keys <↑> Move to the prevous tem <↓> Move to the next tem <←> Move to the tem n the left hand <→> Move to the tem n the rght hand <Enter> Select the tem <Esc> Jumps to the Ext menu or returns to the man menu from a submenu <+/PU>...

  • Page 38: The MaN Menu

    ▍ BIOS Setup ▍ BIOS Setup ▶ Standard CMOS Features Use ths menu for basc system configuratons, such as tme, date etc. ▶ Advanced BIOS Features Use ths menu to setup the tems of AMI specal enhanced features. ® ▶ Integrated Perpherals Use ths menu to specfy your settngs for ntegrated perpherals.
  • Page 39 MS-7602 MS-7602 ▶ User Settngs Use ths menu to save/ load your settngs to/ from CMOS for BIOS. ▶ M-Flash Use ths menu to read/ flash the BIOS from storage drve (FAT/ FAT32 format only). ▶ Load Fal-Safe Defaults Use ths menu to load the default values set by the BIOS vendor for stable system performance.

  • Page 40: Standard Cmos Features

    ▍ BIOS Setup ▍ BIOS Setup cMoS f tandard eatureS The tems n Standard CMOS Features Menu ncludes some basc setup tems. Use the arrow keys to hghlght the tem and then use the <PgUp> or <PgDn> keys to select the value you want n each tem.
  • Page 41 MS-7602 MS-7602 ▶ Devce / Vendor / Sze It wll showng the devce nformaton that you connected to the SATA connector. ▶ LBA/Large Mode Ths allows you to enable or dsable the LBA Mode. Settng to Auto enables LBA mode f the devce supports t and the devces s not already formatted wth LBA mode dsabled.

  • Page 42: Advanced Bios Features

    ▍ BIOS Setup ▍ BIOS Setup bioS f dvanced eatureS ▶ BIOS Flash Protecton Ths functon protects the BIOS from accdental corrupton by unauthorzed users or computer vruses. When enabled, the BIOS data cannot be changed when attempt- ng to update the BIOS wth a Flash utlty. To successfully update the BIOS, you wll need to dsable ths Flash BIOS Protecton functon.
  • Page 43 MS-7602 MS-7602 Controller). Due to complance wth PC2001 desgn gude, the system s able to run n APIC mode. Enablng APIC mode wll expand avalable IRQ resources for the system. ▶ MPS Table Verson Ths field allows you to select whch MPS (Mult-Processor Specficaton) verson to be used for the operatng system.
  • Page 44 ▍ BIOS Setup ▍ BIOS Setup ▶ DVMT Mode Select Ths tem allows you to set the mode for the graphcs core.. [Fxed Mode] a fixed-sze fragment of the system memory s allocated to the graphcs core. It can only be used by the graphcs core. [DVMT Mode] the drver of the graphcs core uses the system memory lke any other OS component or applcaton does.

  • Page 45: Integrated PerPherals

    MS-7602 MS-7602 ntegrated eripheraLS ▶ USB Controller Ths settng allows you to enable/dsable the onboard USB controller. ▶ USB Devce Legacy Support Select [Enabled] f you need to use a USB-nterfaced devce n the operatng system. ▶ Onboard LAN Controller Ths tem s used to enable/dsable the onboard 1st LAN controller.
  • Page 46 ▍ BIOS Setup ▍ BIOS Setup ▶ RAID Mode Ths tem allows you to configure RAID mode for onboard SATA devces. ▶ I/O Devces Press <Enter> to enter the sub-menu and the followng screen appears: 3-12...

  • Page 47: Power Management Setup

    MS-7602 MS-7602 ower anageMent etup ▶ ACPI Functon Ths tem s to actvate the ACPI (Advanced Configuraton and Power Management Interface) Functon. If your operatng system s ACPI-aware, select [Enabled]. ▶ ACPI Standby State Ths tem specfies the power savng modes for ACPI functon. ▶...
  • Page 48 ▍ BIOS Setup ▍ BIOS Setup ▶ Wake Up Event Setup Press <Enter> and the followng sub-menu appears. ▶ Wake Up Event By Settng to [BIOS] actvates the followng fields, and use the followng fields to set the wake up events. Settng to [OS], the wake up events wll be defined by OS. ▶...
  • Page 49 MS-7602 MS-7602 h/w M onitor ▶ Chasss Intruson The field enables or dsables the feature of recordng the chasss ntruson status and ssung a warnng message f the chasss s once opened. To clear the warnng mes- sage, set the field to [Reset]. The settng of the field wll automatcally return to [Enabled] later.

  • Page 50: Bios SettNg Password

    ▍ BIOS Setup ▍ BIOS Setup bioS S etting aSSword When you select ths functon, a message as below wll appear on the screen: Type the password, up to sx characters n length, and press <Enter>. The password typed now wll replace any prevously set password from CMOS memory. You wll be prompted to confirm the password.

  • Page 51: Green Power

    MS-7602 MS-7602 reen ower ▶ CPU Phase Control When set to [Enabled], the hardware wll auto adjust the CPU power phase accordng to the loadng of CPU to reach the best power savng functon. ▶ LED Power Control Ths tem s used to enable/dsable the onboard LED lghts. 3-17...

  • Page 52: Cell Menu

    ▍ BIOS Setup ▍ BIOS Setup Important Change these settngs only f you are famlar wth the chpset. ▶ Current Core / DRAM / QPI Frequency These tems show the current clocks of CPU core, Memory and QPI speed. Read- only.
  • Page 53 MS-7602 MS-7602 ▶ CPU Technology Support Press <Enter> to enter the sub-menu and the followng screen appears. Ths sub-menu dsplays the technologes that the nstalled CPU supported. ▶ Adjust CPU FSB Frequency (MHz) Ths tem allows you to set the CPU FSB frequency (n MHz). ▶...
  • Page 54 ▍ BIOS Setup ▍ BIOS Setup These tems dsplay the current status of the current DIMM Memory speed nforma- tons. They are read only. ▶ Advance DRAM Configuraton Press <Enter> to enter the sub-menu and the followng screen appears. ▶ DRAM Tmng Mode Selects whether DRAM tmng s controlled by the SPD (Seral Presence Detect) EE- PROM on the DRAM module.
  • Page 55 MS-7602 MS-7602 ▶ When the DRAM Tmng Mode sets to [Manual], the field s adjustable. Ths settng controls the number of cycles for Row Address Strobe (RAS) to be allowed to pre- charge. If nsufficent tme s allowed for the RAS to accumulate ts charge before DRAM refresh may be ncomplete and DRAM may fal to retan data.
  • Page 56 ▍ BIOS Setup ▍ BIOS Setup For CPU Voltage: The value here s the offset for you to adjust/add based on the current CPU voltage. Please read the real-tme CPU voltage n “CPU Vcore” n the “H/W montor” page. Please note the based CPU Voltage wll vary dependng on the dfferent CPU you nstall.
  • Page 57 MS-7602 MS-7602 Important Faled Overclockng Resoluton Ths motherboard supports overclockng greatly. However, please make sure your pe- rpherals and components are bearable for some specal settngs. Any operaton that exceeds product specficaton s not recommended. Any rsk or damge resultng from mproper operaton wll not be under our product warranty.

  • Page 58: User SettNgs

    ▍ BIOS Setup ▍ BIOS Setup ettingS ▶ Save Settngs 1/ 2/ 3/ 4 These tems are used to save the settngs set by yourself to CMOS. ▶ Load Settngs 1/ 2/ 3/ 4 These tems are avalable after you save your settngs n Save Settngs 1/ 2/ 3/ 4 tems , and are used to load the settngs from CMOS.

  • Page 59: M-Flash

    MS-7602 MS-7602 LaSh == BIOS Update or Load BIOS From USB drve== ▶ M-Flash functon as M-Flash funcon allows you to flash BIOS from USB drve/ storage drve (FAT/ FAT32 format only), or allows the system to boot from the BIOS file nsde USB drve (FAT/ FAT32 format only).
  • Page 60 ▍ BIOS Setup ▍ BIOS Setup Important Please refer to the block dagram below about the M-Flash functon. • Due to the specal desgn of some graphcs cards wll cause dark screen durng M- • flash operaton, and you may refer the beeps from the system to confirm the current M-flash process.
  • Page 61 MS-7602 MS-7602 == BIOS Data Savng == The followng fields are used to read the onboard BIOS ROM data, and save t to USB drve/ storage drve. ▶ Save Fle to Selected Devce Please setup a specfic folder n specfic USB drve/ storage drve to save BIOS file from BIOS ROM chp data.

  • Page 62: Load FaL-Safe/ OptMZed Defaults

    ▍ BIOS Setup ptiMized efauLtS The two optons on the man menu allow users to restore all of the BIOS settngs to the default Fal-Safe or Optmzed values. The Optmzed Defaults are the default values set by the manboard manufacturer specfically for optmal performance of the manboard. The Fal-Safe Defaults are the default values set by the BIOS vendor for stable system performance.

  • Page 63: AppendX A Realtek AudO

    Appendx A Realtek Audo The Realtek audo provdes 10-channel DAC that smul- taneously supports 7.1 sound playback and 2 channels of ndependent stereo sound output (multple streamng) through the Front-Out-Left and Front-Out-Rght chan- nels. A-A-1...
  • Page 64 ▍ Realtek Audo hd a nStaLLing the eaLtek udio river You need to nstall the HD audo drver for Realtek audo codec to functon properly before you can get access to 2-, 4-, 6-, 8- channel or 7.1+2 channel audo operatons. Follow the procedures descrbed below to nstall the drvers for dfferent operatng sys- tems.
  • Page 65 MS-7602 Clck Next to nstall the Realtek Hgh Definton Audo Drver. Clck here Clck Fnsh to restart the system. Select ths opton Clck here Clck here...

  • Page 66: Software ConfiguratOn

    ▍ Realtek Audo oftware onfiguration After nstallng the audo drver, you are able to use the 2-, 4-, 6- or 8- channel audo feature now. Clck the audo con from the system tray at the lower-rght corner of the screen to actvate the HD Audo Configuraton. It s also avalable to enable the audo drver by clckng the Realtek HD Audo Manager from the Control Panel.
  • Page 67 MS-7602 Sound Effect Here you can select a sound effect you lke from the Envronment lst. Envronment Smulaton You wll be able to enjoy dfferent sound experence by pullng down the arrow, totally 23 knds of sound effect wll be shown for selecton. Realtek HD Audo Sound Manager also provdes five popular settngs “Stone Corrdor”, “Bathroom”, “Sewer ppe”, “Arena”...
  • Page 68 ▍ Realtek Audo Equalzer Selecton Equalzer frees users from default settngs; users may create ther owned preferred settngs by utlzng ths tool. 10 bands of equalzer, rangng from 100Hz to 16KHz. Save Reset The settngs are saved perma- 10 bands of equalzer would go nently for future use back to the default settng Enable / Dsable...
  • Page 69 MS-7602 Frequently Used Equalzer Settng Realtek recognzes the needs that you mght have. By leveragng our long experence at audo field, Realtek HD Audo Sound Manager provdes you certan optmzed equalzer settngs that are frequently used for your quck enjoyment. [How to Use It] Other than the buttons “Pop”, “Lve”, “Club”...
  • Page 70 ▍ Realtek Audo Mxer In the Mxer part, you may adjust the volumes of the rear and front panels ndvdually. ■ Adjust Volume You can adjust the volume of the speakers that you pluged n front or rear panel by select the Realtek HD Audo rear output or Realtek HD Audo front output tems.
  • Page 71 MS-7602 When you are playng the first audo source (for example: use Wndows Meda Player to play DVD/VCD), the output wll be played from the rear panel, whch s the default settng. Then you must to select the Realtek HD Audo 2nd output from the scroll lst first, and use a dfferent program to play the second audo source (for example: use Wnamp to play MP3 files).
  • Page 72 ▍ Realtek Audo ■ Playback control Tool Mute Playback devce Ths functon s to let you freely decde whch ports to output the sound. And ths s essental when mult- streamng playback enabled. - Realtek HD Audo Rear Output - Realtek HD Audo Front Output Mute You may choose to mute sngle or multple volume controls or to completely mute sound output.
  • Page 73 MS-7602 ■ Recordng control Recordng devce -Back Lne n/Mc, Front Ln n Tool -Realtek HD Audo Input Tool - Show the followng volume controls Ths s to let you freely decde whch volume control tems to be dsplayed. - Enable recordng mult-streamng Important Realtek audo allows you to record the CD, Lne, Mc and Stereo Mx channels smul- taneously, frees you from mxng efforts.
  • Page 74 ▍ Realtek Audo Audo I/O In ths tab, you can easly configure your mult-channel audo functon and speakers. You can choose a desred mult-channel operaton here. ■ Headphone for the common headphone ■ 2CH Speaker for Stereo-Speaker Output ■ 4CH Speaker for 4-Speaker Output ■...
  • Page 75 MS-7602 ■ Connector Settngs Clck to access connector settngs. Dsable front panel jack detecton (optonal) Jack detecton functon only works wth HD audo front panel. Please check f front jacks on your system are so-called AC’97 jacks. If so, please check ths tem to dsable front panel jack detecton.
  • Page 76 ▍ Realtek Audo S/PDIF Short for Sony/Phlps Dgtal Interface, a standard audo file transfer format. S/PDIF al- lows the transfer of dgtal audo sgnals from one devce to another wthout havng to be converted first to an analog format. Mantanng the vablty of a dgtal sgnal prevents the qualty of the sgnal from degradng when t s converted to analog.
  • Page 77 MS-7602 Test Speakers You can select the speaker by clckng t to test ts functonalty. The one you select wll lght up and make testng sound. If any speaker fals to make sound, then check whether the cable s nserted firmly to the connector or replace the bad speakers wth good ones.
  • Page 78 ▍ Realtek Audo Mcrophone In ths tab you may set the functon of the mcrophone. Select the Nose Suppresson to remove the possble nose durng recordng, or select Acoustc Echo Cancellaton to cancel the acoustc echo drung recordng. Acoustc Echo Cancellaton prevents playback sound from beng recorded by mcro- phone together wth your sound.
  • Page 79 MS-7602 3D Audo Demo In ths tab you may adjust your 3D postonal audo before playng 3D audo applcatons lke gamng. You may also select dfferent envronment to choose the most sutable envronment you lke. A-17...
  • Page 80 ▍ Realtek Audo Informaton In ths tab t provdes some nformaton about ths HD Audo Configuraton utlty, nclud- ng Audo Drver Verson, DrectX Verson, Audo Controller & Audo Codec. You may also select the language of ths utlty by choosng from the Language lst. Also there s a selecton Show con n system tray.

  • Page 81: Hardware Setup

    MS-7602 ardware etup Connectng the Speakers When you have set the Mult-Channel Audo Functon mode properly n the software utlty, connect your speakers to the correct phone jacks n accordance wth the settng n software utlty. ■ 2-Channel Mode for Stereo-Speaker Output Lne In Lne Out (Front channels) No functon...
  • Page 82 ▍ Realtek Audo ■ 4-Channel Mode for Stereo-Speaker Output Lne In Lne Out (Front channels) Lne Out (Rear channels) No functon No functon A-20...
  • Page 83 MS-7602 ■ 6-Channel Mode for Stereo-Speaker Output Lne In Lne Out (Front channels) Lne Out (Rear channels) Lne Out (Center and Subwoofer channel) No functon A-21...
  • Page 84 ▍ Realtek Audo ■ 8-Channel Mode for Stereo-Speaker Output Lne In Lne Out (Front channels) Lne Out (Rear channels) Lne Out (Center and Subwoofer channel) Lne Out (Sde channels) Important To enable 7.1 channel audo-out functon on Vsta operatng system, you have to nstall the Realtek Audo Drver.

  • Page 85: AppendX B OverclockNg Center

    Overclockng Center Overclockng Center, the most useful and powerful utl- ty that MSI has spent much research and efforts to de- velop, helps users to montor or configure the hardware status of MSI Manboard n wndows, such as CPU clock, voltage, fan speed and temperature.
  • Page 86 Once you have your Overclockng Center nstalled (locate the setup source file n the setup CD accompanyng wth your manboard, path: Utlty --> MSI Utlty --> Overclock- ng Center), t wll have a short cut con on the desktop, and a short cut path n your “Start-up”...

  • Page 87: System Info

    MS-7602 MS-7602 ySteM In the System Info screen, you can read the nformatons of manboard/ memory/ PCI. Motherboard Clck Motherboard to read the nformatons of manboard, manboard BIOS, nstalled CPU and nstalled graphcs card.

  • Page 88: Dot

    ▍ ▍ Overclockng Center Overclockng Center Clck DOT to enter the DOT screen. In DOT, you can read the basc system status n Basc menu or you can adjust advanced values for overclockng n Advance menu. Basc In the Basc menu, t provdes nformaton on CPU state, temperature, voltage, fan speed and CPU usage.
  • Page 89 MS-7602 MS-7602 Advance In the Advance menu, you can adjust the values for each envronment settng/ default settng. Clck the Coolng/ Slence/ Default/ Game/ Cnema button to enter t’s settng menu. Please refer to the followng descrptons to adjust the values and save them.
  • Page 90 ▍ ▍ Overclockng Center Overclockng Center In each settng menu, you can select desred values for manual overclockng. Smply clck the rght sde of the button whch arranges an arrow sgn, and a drop-down menu wll appear below the button, then select a value. Clck the arrow sgn and the drop-down menu wll appear.
  • Page 91 MS-7602 MS-7602 After you adjust the values n settng menu, you can save t for future use. Clck the Save button, and enter a name n the empty box. Then, clck Save button agan to save the settngs. Important It provdes you to save up to 20 user settngs. Clck the Load button and choose a saved user settng to load the settngs for the sys- tem.

This manual is also suitable for:

Ms-7602

Table of Contents