Picture Mode; Pip Mode; Pip Input; Pip Size - NEC MD242C2 Installation & Maintenance Manual

24.1”/29.8” diagnostic imaging color lcd monitor
Hide thumbs Also See for MD242C2:
Table of Contents

Advertisement

AUTO FINE (Analog input only)*
This function automatically and periodically adjusts the "FINE" setting for change in signal condition.
This function adjusts approximately every 33 minutes.
EXPANSION
Sets the zoom method.
FULL: The image is expanded to full screen regardless of the resolution.
ASPECT: The image is expanded without changing the aspect ratio.
OFF: The image is not expanded.
CUSTOM: Refer to the Advanced OSD menu for detailed instructions.
SHARPNESS
This function is digitally capable of keeping a crisp image at any time. It is continuously adjustable to get as distinct or
as soft an image as your prefer and is set independently for different timings.

PICTURE MODE

PICTURE MODE
Change to a picture mode which is most suitable for the type of content that is shown. You can choose one of two
possible PICTURE MODES. See Advanced OSD menu Tag1 PICTURE MODE (page 19) and "Using the PICTURE
MODE function" (page 17) for more information.
Tools

PIP MODE

Select PIP MODE, OFF/PIP/PICTURE BY PICTURE - ASPECT/PICTURE BY PICTURE - FULL.
This display can display 2 inputs at a time.
OFF
IMAGE ROTATION: ON / SUB IMAGE ROTATION: ON
OFF
MD242C2

PIP INPUT

Selects the PIP input signal.
PIP LEFT/RIGHT
Controls the horizontal position of the Picture in Picture window in PIP mode.
PIP DOWN/UP
Controls the vertical position of the Picture in Picture window in PIP mode.

PIP SIZE

Selects the size of the sub-picture used in PIP mode.
* Only for MD242C2.
1
*
Sub Window by DisplayPort or DVI is displayed on the left half of the display only.
Sub Window by HDMI or Mini-DisplayPort is displayed on the right half of the display only. (MD302C4 only)
2
*
When Main Window is Mini-DisplayPort or HDMI, it is impossible to select PICTURE BY PICTURE - ASPECT/FULL.
When PICTURE BY PICTURE - ASPECT/FULL is selected, it is impossible to change the Main Window Input to Mini-DisplayPort or HDMI. If DisplayPort or DVI signal and PICTURE BY
PICTURE - ASPECT/FULL are used, please connect to DisplayPort or DVI input for Main Window. (MD302C4 only)
PICTURE BY
PIP
PICTURE - ASPECT
1
*
PICTURE BY
PIP
PICTURE - ASPECT
*
2
MD242C2
PICTURE BY
PICTURE - FULL
2
2
*
*
PICTURE BY
PICTURE - FULL
*
2
English-14

Advertisement

Table of Contents
loading

This manual is also suitable for:

Md302c4

Table of Contents