Wi-Fi Protected Setup - Cisco Linksys WET610N Quick Installation Manual

WET610N

Wi-Fi Protected Setup

A.
Use Wi-Fi Protected Setup to
create a wireless connection
between the Bridge and your
router . On your router, press the
button that looks like one of the
icons in the picture . You may
have to hold down this button
until an LED flashes .
Within two minutes, click
Connect on the Quickly Connect
Using Push Button screen .
B.
Please wait while the Setup Wizard connects the Bridge to your wireless
network . Warnings from your firewall or security application may
appear . If necessary, click Always allow or Allow this time only to
allow the wireless connection .
C.
You will connect the Bridge
to the device that you want to
equip with wireless .
Click Next .
D.
The Bridge is connected to your
router with a network cable .
Disconnect this network cable
from your router .
If you need to move the device
that you want to equip with
wireless, then do so now . Click
Next .
Wireless-N Ethernet Bridge with Dual-Band
Wi-Fi Protected Setup Button on Router
English
11