Cisco Linksys WET610N Quick Installation Manual page 5

WET610N
D.
For configuration, you will
temporarily connect the
Bridge to your router . (After
configuration, you will connect
the Bridge to the device
that you want to equip with
wireless .)
Click Next .
E.
Connect one end of the
included network cable to the
Ethernet port of the Bridge .
Click Next .
F.
Connect the other end of
the cable to one of the local
network ports on your router .
Click Next .
G.
Connect the included power
adapter to the Power port of the
Bridge .
Click Next .
Wireless-N Ethernet Bridge with Dual-Band
English
5