Before You Change The Ssid, Wep, And Wpa Settings - NETGEAR ProSafe Premium WNDAP660 Reference Manual

Prosafe premium 3 x 3 dual-band wireless-n access point
Hide thumbs Also See for ProSafe Premium WNDAP660:
Table of Contents

Advertisement

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660
Before You Change the SSID, WEP , and WPA Settings
For a new wireless network, print or copy the following forms and fill in the settings. For an
existing wireless network, the network administrator can provide this information. Be sure to
set the country or region correctly as the first step.
Form for 802.11b/bg/ng Modes
Print this page and store the security information in a safe place:
SSID: The service set identifier (SSID) identifies the wireless local area network. You can
customize it by using up to 32 alphanumeric characters. Write your SSID on the line.
SSID: ___________________________________
The SSID in the wireless access point is the SSID you configure on the wireless adapter
card. All wireless nodes in the same network need to be configured with the same SSID.
WEP key size and authentication
Choose the key size by circling one: 64, 128, or 152 bits.
Choose the authentication type by circling one: open system or shared key.
Passphrase: ___________________________________
Note: If you select shared key, the other devices in the network cannot connect unless
they are set to shared key and have the same keys in the same positions as those in the
wireless access point.
WPA-PSK (pre-shared key) and WPA2-PSK
Record the WPA-PSK passphrase:
WPA-PSK passphrase: ________________________________
Record the WPA2-PSK passphrase:
WPA2-PSK passphrase: ________________________________
WPA RADIUS settings
For WPA, record the following settings for the primary and secondary RADIUS servers:
Server name/IP address: Primary ________________ Secondary _________________
Port:
___________________________________
Shared secret: ___________________________________
WPA2 RADIUS settings
For WPA2, record the following settings for the primary and secondary RADIUS servers:
Server name/IP address: Primary ________________ Secondary _________________
Port:
___________________________________
Shared secret: ___________________________________
------------------------------------------------
--------------------------------------------------------
End of Form
Wireless Configuration and Security
46

Advertisement

Table of Contents
loading

Table of Contents