NETGEAR ProSafe Premium WNDAP660 Reference Manual page 63

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660
WMM defines the following four queues in decreasing order of priority:
• Voice. The highest priority queue with minimum delay, which makes it ideal for
applications like VoIP and streaming media.
• Video. The second highest priority queue with low delay is given to this queue. Video
applications are routed to this queue.
• Best Effort. The medium priority queue with medium delay is given to this queue. Most
standard IP applications use this queue.
• Background. Low priority queue with high throughput. Applications, such as FTP, that
are not time-sensitive but require high throughput can use this queue.
The WMM Powersave feature saves power for battery-powered equipment by increasing the
efficiency and flexibility of data transmission.
Note: For information about how to configure advanced wireless QoS, that
is, to configure specific Enhanced Distributed Channel Access
(EDCA) settings, see
Settings

To configure basic wireless QoS:
1. Select Configuration > Wireless > Basic > QoS Settings. The basic QoS Settings
screen displays:
Figure 33.
2. Optional: To display the basic QoS Settings screen for the 802.11a/na modes, click the
802.11a/na tab.
3. Enable or disable the WMM features:
• Enable Wi-Fi Multimedia (WMM). To enable this feature, select the Enable radio
button, which is the default setting. Select the Disable radio button to disable the
feature.
• WMM Powersave. To enable this feature, select the Enable radio button, which is the
default setting. Select the Disable radio button to disable the feature.
4. Click Apply to save your settings.
Configure Advanced Quality of Service
on page 111.
Wireless Configuration and Security
63