NETGEAR ProSafe Premium WNDAP660 Reference Manual page 58

ProSafe Premium 3 x 3 Dual-Band Wireless-N Access Point WNDAP660

To configure the RADIUS server settings:
1. Select Configuration > Security > Advanced > Radius Server Settings. The Radius
Server Settings screen displays.
Figure 30.
2. Specify the settings as explained in the following table:
Table 14. RADIUS server settings for IPv4 and IPv6
Setting
Radius Server Settings
Primary
Authentication Server
Descriptions
IPv4 Address or Enter the IP address of the primary RADIUS server for
IPv6 Address authentication.
Port Enter the number of the UDP port on the wireless access point
that is used to access the primary RADIUS server for
authentication. The default port number is 1812.
Shared Secret Enter the shared key that is used between the wireless access
point and the primary RADIUS server during authentication.
Wireless Configuration and Security
58