Download
Share
Print this page
NETGEAR ReadyNAS OS 6 Rack-Mount Storage Systems Installation Manual
  1. Manuals
  2. Brands
  3. NETGEAR Manuals
  4. Network Hardware
  5. ReadyNAS OS 6 Desktop Storage Systems
  6. Installation manual
NETGEAR ReadyNAS OS 6 Rack-Mount Storage Systems Installation Manual

NETGEAR ReadyNAS OS 6 Rack-Mount Storage Systems Installation Manual

Rack-mount storage systems
Hide thumbs Also See for ReadyNAS OS 6 Rack-Mount Storage Systems:

Advertisement

Quick Links

Download this manual
ReadyNAS OS 6
Rack-Mount Storage Systems
Installation Guide

Advertisement

loading

Related Manuals for NETGEAR ReadyNAS OS 6 Rack-Mount Storage Systems

Summary of Contents for NETGEAR ReadyNAS OS 6 Rack-Mount Storage Systems

  • Page 1 ReadyNAS OS 6 Rack-Mount Storage Systems Installation Guide...
  • Page 2 Contents Package Contents ........3 Basic Setup .

  • Page 3: Package Contents

    Package Contents ReadyNAS system Resource CD Ethernet cable Power cord (varies by model) IMPORTANT: Read all safety warnings in the hardware manual for your system before connecting the system to the power supply.

  • Page 4: Basic Setup

    See Reformat Disks on page 7. For a list of supported disks, see the Hardware Compatibility List at http://www.netgear.com/readynas-hcl. For information about installing disks, see the hardware manual for your system. Place your system in a location that provides adequate ventilation.
  • Page 5 Visit http://readycloud.netgear.com on a computer that uses the same local area network (LAN) and Internet connection as your ReadyNAS system. Note: If your computer does not have Internet access, install and run the RAIDar utility instead. RAIDar is on the resource CD that came with your system.
  • Page 6 OK button. Note: You can change these credentials when you configure your system. NETGEAR recommends that you change your password as soon as possible. The ReadyNAS local admin page displays in your browser and launches a setup wizard.

  • Page 7: Reformat Disks

    10. Install the previously formatted disks. For a list of supported disks, see the Hardware Compatibility List at http://www.netgear.com/readynas-hcl. For information about installing disks, see the hardware manual for your system. Using a straightened paper clip, press and hold the Reset button.
  • Page 8 Select the factory default option from the boot menu. • If you have a 4-bay storage system, do the following: Press and release the Reset button to scroll through the boot menu options. When only the LAN 1 and Power LEDs are lit, press and hold the Reset button for three seconds.
  • Page 9 On a computer that is connected to the same LAN as your ReadyNAS system, download and install the latest version of RAIDar. You can find the latest version of RAIDar at http://www.netgear.com/raidar. Launch RAIDar and select your system from the list of detected devices. Click the Format button.

  • Page 10: Additional Information

    Links to these manuals are included on the resource CD that came with your system and are also available at http://support.netgear.com/product/ReadyNAS-OS6 or through a link in the product’s user interface.
  • Page 12 Trademarks NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.