Name Of Parts; Specifications; Standard Accessories; Optional Accessories...sold Separately - Hitachi H 65 Instruction Manual

NAME OF PARTS

SPECIFICATIONS

Motor
Power Source
Current
Full-Load Impact Rate:
Weight
ACCESSORIES
CAUTION:
Only following genuine accessories for this power tool should be used.
The use of any other attachment or accessory is not recommended because it may cause
hazard including bodily injury.

STANDARD ACCESSORIES

(1) Steel Case .......................................................................................................................... 1
(2) Bull Point (Code No. 985230) ........................................................................................... 1
(3) Oil Feeder (Code No. 931848) .......................................................................................... 1
(4) Hexagon Bar Wrench for M8 (Code No. 872422) ........................................................... 1
(5) Wrench (Code No. 971109) .............................................................................................. 1

OPTIONAL ACCESSORIES...sold separately

1. Bull point
2. Cold chisel
Side Handle
Front Cover
Oil Gauge
Retainer
Fig. 1
Single-Phase, Series Commutator Motor
Single-Phase, 115V AC, 60 Hz
11.4A
1,400/min
39.7 lbs (18 kg)
Name Plate
Cap Cover
Handle Cover
Overall length: 20-1/2"(520 mm)
Code No.: 985230
Overall length: 20-1/2" (520 mm)
Code No.: 985231
Switch Trigger
6