Chicago Electric 47840 Owner's Manual & Safety Instructions page 6

Specifications
Capacity 4‑1/2" x 4‑1/2"
Motor 120V~ / 60Hz / 6A
Blade FPM 0 ~ 230
Blade TPI 14
Blade Dimensions 44‑7/8" L x 1/2" W x 0.025" Thick
Features 3 Bearing Blade Guide,
Trigger Lock, Variable Speed
Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETy INFORMATION section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURy FROM AccIDENTAL OPERATION:
Turn the Power Switch of the tool off and unplug the tool from its electrical outlet
before assembling or making any adjustments to the tool.
Note: For additional information regarding the parts listed in the following pages,
refer to Parts List and Diagram on page 10.
Guide Bar Assembly
1. Assemble the Guide Bar (63) to the
bandsaw before operation.
2. Remove the Screws (62) on the Frame (21),
along with their Lock and Flat Washers (47, 46).
3. Install the Guide Bar around the blade as shown
using the Screws (62), Lock Washers (47),
and Flat Washers (46). See Figure A.
Auxiliary
Handle
Tension
Handle
Page 6
Figure B: Functions
For technical questions, please call 1-800-444-3353.
Note: Performance of this tool (if powered by line voltage)
may vary depending on variations in local line voltage.
Extension cord usage may also affect tool performance.
46, 47, & 62
63
Figure A: Guide Bar
Trigger
(with Speed Dial)
Blade
E257393
Trigger
Lock
Guide
Bar
REV 05e; 06f; 10e; 10g, 10l
Item 47840