Advertisement
Quick Links
6-1/2" (18V)
CIRCULAR SAW
41903
ASSEMBLY & OPERATING INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
©
®
Copyright
1999 by Harbor Freight Tools
. All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the express
written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
Advertisement
Related Manuals for Chicago Electric 41903
Summary of Contents for Chicago Electric 41903
-
Page 1: Circular Saw
6-1/2” (18V) CIRCULAR SAW 41903 ASSEMBLY & OPERATING INSTRUCTIONS ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com © ® Copyright 1999 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. - Page 2 THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner’s record below: Model______________ Serial No.____________ Purchase Date__________ SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire manual to become familiar with the unit BEFORE you begin assembly. Technical Specifications Tool Name: 6-1/2"...
- Page 3 Work Area TO AVOID RISK OF PERSONAL INJURY, EQUIPMENT DAMAGE, FIRE AND SHOCK, MAKE SURE YOUR WORK AREA IS: Free of damp, wet or rainy conditions. Free of flammable gasses or liquids. Free of children (never let them handle tools or machinery). Well-lit.
- Page 4 Warning: Never charge more than 2 hours continuously. Chargers should not be left plugged in or charging for more than 2 hours. Charging the Battery Pack The Battery Pack (part #14) does not come charged from the factory. Charge it before using. Step 1) Insert the Battery Pack (#14) into the Quick Charger.
- Page 5 Step 3) While continuing to hold down the Lock Button, use the 4 mm Hex Wrench to loosen and remove the Arbor Bolt (part #38). Remove the Spring Washer Press Stop Button (part #37) and the Flange (part #36). Step 4) Rotate the Retractable Guard (part #32) clockwise Arbor Bolt (#38) to allow entry of the Saw Blade (part #35).
- Page 6 Adjusting the Saw Prior to Cutting Step 1) To adjust the angle of the Saw Blade up to 50° loosen the Bevel Adjustment Knob (part #50) and move the Shoe (part #53) down paying attention to the degrees indicated on the angle scale (See Figure 4). Once set, retighten the Bevel Adjustment Knob (part #50).
-
Page 7: Please Read The Following Carefully
Maintenance CLEANING: Before remounting the Saw Blade, remove all sawdust that has accumulated around the Retractable Guard (part #32) and the Spacer (part #22), Bolts and Washers. Regularly clean the work surface with a vacuum cleaner or a dry brush. At the end of every work session, remove sawdust from the motor vents. -
Page 8: Unpack And Check Contents
Unpacking UNPACK AND CHECK CONTENTS When unpacking your Circular 6-1/2", 18V Saw, check to make sure the following parts are included. If any parts are missing or broken, please call HARBOR FREIGHT TOOLS at 1-800-444-3353. Parts List-#41903 Part # Description Quantity Part # Description... - Page 9 Assembly Diagram - 41903 Note: Charger (#55) is not shown. 4mm Hex Wrench (#56) is not shown. SKU 41903 For technical questions, please call 1-800-444-3353. Page 9...
Need help?
Do you have a question about the 41903 and is the answer not in the manual?
Questions and answers