Connecting To Input Jacks; Input Select; Installing The Batteries - Hitachi VT-MX411AC Owner's Manual

Hitachi owner's manual video deck vt-mx411ac

Table of Contents

PREPARATION FOR USE

CONNECTING TO INPUT JACKS

When you copy a video tape, or watch a program recorded on an another source, use audio/video

input jacks.

To use the external input jacks, select the AUX position. Press the CHANNEL

or enter "00" with number button on the remote control so that "AUX" appears on the screen.

Note: "AUX" is found before the lowest memorized channel. (Example: CH2)

1) Open the battery compartment cover by pressing the cover on the remote unit in the direction

of the arrow.

2) Insert 2 "AA" penlight batteries into the battery compartment in the direction indicated by the

polarity (+/-) markings.

3) Replace the cover.

Note to CATV system installer:

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC

that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall

be connected to the grounding system of the building as close to the poing of cable entry as practical.

button

Table of Contents