Table of Contents
Advertisement
TIMER RECORDING
Notes:
• Set the tape remainder switch ("~T60", "~T130" or "T140~") to the tape loaded. See "Setting the
Remaining Time" on next page.
• Even if SLP mode is selected, just-in time recording cannot compensate for a tape length which
may be too short.
• A momentary picture break up will occur at the point on the tape when the recording speed
changes from SP to SLP.
• The displayed remaining tape running time may not always match the actual remaining time on the
tape (usually longer than the actual time). It is recommended to set the end of the reversed recording
time several minutes after the end of the TV program.
50
Advertisement
Table of Contents
