Multi Screen; Status; Position; H-Bezel - Sharp TL-M4600 Operation Manual

Sharp tl-m4600: user guide
Hide thumbs Also See for TL-M4600:
Table of Contents

Advertisement

Menu operations
n Multi Screen
You can align , 3, 4, 9, or 6 monitors and integrate
them into a single large screen to display.
Enlarged views of separated images are displayed
in each monitor.
Selectable
items

Status

Sets the number of screen splits used
for the enlargement.

Position

Specify the split screen to be
displayed when this function is used.

H-Bezel

Sets the frame width of the display

V-Bezel

when this function is used.

H-Position

Adjust the horizontal position of the
enlarged screen.

V-Position

Adjust the vertical position of the
enlarged screen.

Reset

Resets all adjustment items to factory
preset values.
Original
image
 monitors (x)
1−1
2−1
3 monitors (3x)
1−1
2−1
3−1
4 monitors (4x)
1−1
2−1
3−1
4 monitors (x)
1−1
2−1
1−2
2−2
9 monitors (3x3)
1−1
2−1
3−1
1−2
2−2
3−2
1−3
2−3
3−3
6 monitors (4x4)
1−1
2−1
3−1
1−2
2−2
3−2
1−3
2−3
3−3
1−4
2−4
3−4
44
Description
4−1
4−1
4−2
4−3
4−4
Note
• The availability of Multi Screen modes depending on the
video signal is as follows.
Input
Video
Mode
Signal
S-VIDEO
NTSC
VIDEO
PAL
SECAM
Computer
480I
Computer
576I
N/A: Not Available
• "Status" and "Position" may not be selected depending
on the input signal.
• Depending on the number of monitors and/or the input
signal, a distributor for the input signal (commercially
available) is required. For details, refer to the "SETUP
MANUAL".
n Power On Delay
You can delay the screen display after the monitor is
turned on. The period can be set up to 00 seconds
in units of  second. When this function is activated,
the POWER indicator flashes (at approx.  second
interval) in orange. This function is disabled when 0
is specified.
n LED
Specifies whether to light the indicators (POWER,
TIMER, and OPC).
Selectable items
On
Off
Note
• Even if "LED" is set to "Off", the POWER indicator lights
red in standby mode.
• When backlight and/or temperature problems occur, the
TIMER indicator flashes red, even if "LED" is set to "Off".
n Selecting the background image

(Background)

Selectable items
Blue
None
3x1
4x1
3x3
4x4
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Description
According to the setting,
the indicators light up.
The indicators do not
light up.
Description
Blue screen
Black screen

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tl-m5200

Table of Contents