Audio Menu; Power Control Menu; Audio; Treble - Sharp LCD Monitor User Manual

Menu operations

Audio menu

Audio

Standard

Treble

[ 0] -

Bass

[ 0] -

Balance

[ 0] L

Reset

Audio adjustment
You can adjust the audio of the selected AV mode.
Selectable
◄button
items
Treble For weaker treble
Bass For weaker bass
Balance Decrease audio
from the right
speaker
Note
• For resetting all adjustment items to the factory preset
values, press ▲/▼ to select "Reset", press ENTER,
press ▲/▼ to select "Yes", and then press ENTER.
34

Power Control

+
+
R
►button
For stronger treble
For stronger bass
Decrease audio
from the left
speaker

Power Control menu

Power Control

Power Management

No Operation Off

Ecology
Power Management
You can set the monitor to automatically power off
when there is no image displayed on the computer.
Selectable
Description
items
Off • No power management
• Factory preset value.
Mode1 • If no signal inputs for approximately
8 minutes, the power shuts down.
• Even if you start using the computer
and the signal inputs again, the
monitor stays off.
• The monitor turns on again by
pressing ON on the remote control.
Mode2 • If no signal inputs for approximately
8 seconds, the power shuts down.
• When you start using the computer
and the signal inputs again, the
monitor turns on.
Note
• If you turn off the power by disconnecting the power cord
when setting "Mode2" in power management, the monitor
may not function properly after turning the power on
again. In such case, press ON on the remote control.
• Pressing POWER on the monitor will have the same
result.
Auto power-off when there are no
operations performed
(No Operation Off)
You can set the monitor to automatically power off
when no operation is performed for more than 30
minutes or 3 hours.
Note
• "Disable" is the factory preset value.