Names Of Parts And Power Input - Sharp MX-6240N Quick Start Manual

NAMES OF PARTS AND POWER INPUT

The machine has two power switches: The main power switch inside the front cover located in the lower left corner, and the [POWER] button (
Turning on the power
• Turn the main power switch to the " " position.
The main power indicator blinks in green. The [POWER] button
( ) does not function while the main power indicator blinks in
green.
• After the main power indicator lights up green, press the
[POWER] button ( ).
Turning off the power
Turn off the power by pressing the [POWER] button (
main power switch to the " " position.
Restarting the machine
In order for some settings to take effect, the machine must be restarted.
Follow the message displayed on the touch panel to restart the system
(turn off the power by pressing the [POWER] button (
again to turn the power back on).
Caution:
• When turning off the main power switch, make sure that all indicators other than the
main power are turned off.
• In the case of a sudden main power outage, turn the power for the machine back on
and then turn it off in the correct order. If you turn off the main power switch or unplug
the power cord while the indicator is lit up or blinking, the hard disk drive may be
damaged or data may be lost.
• Turn off both the [POWER] button (
power cord if you suspect a machine failure, if there is a bad thunderstorm nearby, or
when you are moving the machine.
), then turn the
) and then press it
) and the main power switch and unplug the
Output tray (Centre tray)
USB connector (A type)
Automatic document feeder
Front cover (Upper)
Front cover (Lower)
Main power switch
Saddle finisher
• Please note that the Bypass-tray is standard feature in some countries and
regions.
• When using the fax or Internet fax function, always keep the main power switch in
the "On" position.
• In some machine operating states, restarting using the [POWER] button (
not make the settings take effect. In this case, turn off the main power switch and
then turn it on again.
) on the operation panel.
Keyboard Main power indicator
*
[POWER] button
Operation panel
Right tray *
Bypass-tray
Tray 5 (MX-LC12)
Tray 2
Tray 3
Tray 4
Tray 1
Punch module
*
*
*
*
Optional
*
) may
7