Copy Output - Sharp MX-6240N Quick Start Manual

COPY OUTPUT

Configure the output settings for copies using Sort, Group, Offset, Staple, Punch, or Fold.
Basic operations
1
Select [Output]
Output tray settings
Output tray settings
Specify the destination to output copies.
The output tray currently selected is indicated by an arrow.
(When a finisher (100-sheet stapling) or saddle finisher
(100-sheet stapling) is installed)
The [Middle Tray] key can be selected.
Outputs to the offset tray
Outputs to the right tray
If the offset, staple sort, saddle stitch, fold, or
punch function is specified, the right tray is not
available.
2
Copy output settings
1 Specify the output tray
2 Select the output and paper output type
3 Specify the details of output mode
Sort/Group function
This function sets the sorting method when copying a scanned
original.
(When a finisher or saddle finisher is installed)
Select this function when you wish to output copies while shifting
them set by set.
Selecting the staple function clears the Offset checkmark
automatically.
3
Check the preview image
Sorts the scanned original on a set basis, and
outputs them
Groups the scanned original on a page basis,
and outputs them.
Offset function
4
Start
(Black & white, or colour)
Sort staple
(When a finisher or saddle finisher is installed)
This function staples the output copies and deliver them to the tray.
1 staple in back
1 staple in front
2 Staples
Copies can be folded at the centre, stapled,
and output.
This function is only available when a saddle
finisher is installed.
18