Recording; Viewing And Recording The Same Program - Hitachi VT-FX602S Owner's Manual

RECORDING

in the forward direction.
• Tape must be fully rewound.
1 Select "BLANK SEARCH" mode
Press BLANK SEARCH button.
The VCR begins fast forwarding to the beginning of the blank part of the
tape.
BLANK SEARCH
2 After Blank Search
The VCR will automatically stop.
RECORDING
Make sure...
• VCR power must be turned on.
• Turn on the TV and set the TV channel to the same video output channel
as located on the back of the VCR. (CH 3 or 4)
• Press VCR/TV button on the remote control so that "VCR" appears on
the display.
• Insert a cassette with its erase prevention tab in place. (If necessary,
rewind or fast forward the tape to the point at which you want to begin
recording.)
• You must select the recording mode in TV STEREO or SAP when you
record a broadcast.
Refer to "TO SELECT STEREO OR SAP MODE" on page 13.

VIEWING AND RECORDING THE SAME PROGRAM

1 Select the channel to be recorded
Press number buttons on the remote control or the CHANNEL (or
CH/SET) or button.
CH 32
- 47 -