Hitachi VT-FX602S Owner's Manual page 56

TIMER RECORDING
Press CH/SET
appears. (Example: SP)
• "AUTO" is available only with Program No. 1.
See "Just-In Time Recording" on page 31 for the use of "AUTO" setting.
10 Exit the program mode
Press MENU button. Program 1 is now completed.
To set another program, repeat steps [1] to [10].
11 Set the timer
Press POWER button. The "
number of all programmed events are displayed with current time.
TO CORRECT AN AUTOMATIC TIMER PROGRAM
If you want to correct an automatic timer after you finished setting
program,
1) Repeat steps [1] to [3] on previous page.
2) Select a digit you want to change using SELECT button or
ADD/DELETE button.
3) Enter correct numbers using CH/SET
4) Press MENU button to return to original mode.
5) Press POWER button to return to timer stand-by mode.
TO STOP AN AUTOMATIC TIMER PROGRAM WHICH HAS
ALREADY STARTED
Press STOP/EJECT button on the VCR.
NOTE: STOP button on the remote control will not function in the Automatic
Timer Recording mode.
TO CANCEL OR CHECK THE START/END TIME
or button repeatedly until your desired tape speed
ONE TIME PROGRAM
DATE 05 / 06 MON
START TIME 07 : 30 PM
END TIME 08 : 30 PM
CHANNEL 16
REC SPEED SP
SP
SLP
" indicator appears on the display. The
LP
AUTO
or button.
- 56 -