Advertisement
Keep hands away from jets of water, and beware of water reflecting back off surfaces.
Do not direct water onto fire or hot surfaces. Heat particles and steam can be very dangerous.
Use your hand ONLY to squeeze the trigger. Do not jam trigger to the ON position.
Before disconnecting the high pressure hose, turn off the machine first, then squeeze the trigger
until there is no more water pressure left in the system.
Do not bend, twist or fold the hose.
A fluctuating or excessive high water pressure may be a signal of a defect or accumulation of
calcium in the hose. If this occurs, turn the machine off immediately.
Do not run the cleaner without water. This will damage it.
Before starting the machine, full open the water supply tap. Be careful not to bend the hose.
If the machine hose or tube freezes in the winter, do not use the machine. Before storage, the water
must be drained from the machine. Always store the washer in a secure, dry location.
Do not use the machine in a dirty location.
Place machine on flat surface.
Seawater is not suitable for use with this machine.
This appliance is not intended for long-term industrial use.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or cognitive capabilities, or lack of experience or knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
The function of the safety valve: when the pressure exceeds the preset value, the valve returns the
excess fluid into the inlet system.
The function of the pressure switch: when flow to the gun is halted, the pressure switch will
activate, cutting off the power supply for protective reasons.
Advertisement
