Advertisement
Quick Links
Advertisement
Summary of Contents for Kogan KAHPC18REDA
- Page 1 KAHPC18REDA USER MANUAL...
-
Page 2: Technical Data
1 – High pressure washer 2 – Wheel 3 – Inlet connector 4 – Outlet connector 5 – Handle 6 – Trigger gun 7 – Detergent bottle Technical Data: Rated pressure 9.0MPa Permissible pressure (max.) 12.5MPa Inlet (max.) 0.3MPa Rated flow 6.0 l/min Max. -
Page 3: Electrical Diagram
Rated power input 1800W Degree of protection IPX5 Protection class Sound power level 98 dB (A) Sound pressure level 80 -+3 dB (A) Acceleration 1.0 -+ 0.15 m2/s2 Water temperature max. 7KGs This appliance can be used for cleaning cars, floors, rooms etc... Electrical Diagram General Safety Rules This machine has been designed for use with mild detergents and cleaning agents. - Page 4 High pressure hose, fittings and couplings are important for the safety of this product. Use • only hoses, fittings and couplings as recommended and/or supplied by Kogan. Do not use the appliance if the supply cord or important parts of the appliance are damaged.
- Page 5 Keep hands away from jets of water, and beware of water reflecting back off surfaces. Do not direct water onto fire or hot surfaces. Heat particles and steam can be very dangerous. Use your hand ONLY to squeeze the trigger. Do not jam trigger to the ON position. Before disconnecting the high pressure hose, turn off the machine first, then squeeze the trigger until there is no more water pressure left in the system.
- Page 6 Assembly Before use, please assemble the high pressure cleaner step by step. First, connect the water feeding pipe to the suction pipe by making use of a stiffened tube, then connect the other end of the suction pipe to the machines inlet (See fig 1). Connect the pressure hose to the machine's outlet (See fig 2).
-
Page 7: Use Of The Appliance
Connect to the water supply The cleaner is not suitable for connection directly to potable water mains. Connect the machine to the water supply (alternately it can be a water container). Make sure the inlet water pressure keeps between 0.01MPa and 0.3MPa. The inlet pipe should be at least 5M long. - Page 8 Cut off the power if the appliance malfunctions. Problem Probable Cause Possible Solution Machine will not start working 1. No power supply. Contact Kogan customer 2. Faulty power supply. support. 3. Locking ring of pump too tight. Not enough water coming out 1.
- Page 9 After use, ensure there is no residual water left in the pump and hose. If the product needs to be repaired and is still under warranty, please contact the Kogan customer support team.