Advertisement
The electrical supply connection should be made by a qualified person and comply with IEC
•
60364-1.
The electric supply to this appliance should include either a residual current device that will
•
interrupt the supply if the leakage current to earth exceeds 30mA for 30ms or a device that
will prove the earth circuit.
Keep operation area clear of all persons.
•
High pressure hose, fittings and couplings are important for the safety of this product. Use
•
only hoses, fittings and couplings as recommended and/or supplied by Kogan.
Do not use the appliance if the supply cord or important parts of the appliance are damaged.
•
If an extension cord is used, the plug and socket must be of watertight construction.
•
Improper extension cords can be dangerous!
•
High pressure jets can be dangerous if subject to misuse. The jet must not be directed at
•
persons, live electrical equipment or the appliance itself.
Do not direct the jet towards yourself or others in order to clean clothes or foot-wear.
•
Disconnect from the electrical power supply before carrying out any maintenance.
•
To ensure appliance safety, use only original spare parts from Kogan.
•
Do not leave the appliance unattended while the machine is running.
•
Turn off the unit in the event of an accident (eg – contact with detergents, rinse with an
•
abundance of clean water) or a breakdown to avoid unsafe situations.
When the appliance is moving and being installed, the appliance must be placed on a flat
•
secure surface.
Additional Safety Instructions
In order to safely use the cleaner, make sure you have read and understood all of these instructions
and have checked the machine prior to operation. Try using the machine on concrete or an
unpainted brick wall to get accustomed to the usage.
Machine, hose and plug must be checked prior to operation. Defective parts must be replaced.
Do not direct the jet at power sockets, people, animals or the machine itself.
Do not touch the electrical plug or any wall sockets with wet hands.
Use the handle to move the machine. Do NOT drag the power cord to move the unit.
When unplugging power, grasp the plug itself, not the cord.
Keep the power cord in a dry location when in use.
To achieve maximum operating pressure, the outlet hose should be at least 3M long.
Do not use the pressure cleaner in a flammable environment.
Take care against kickback when operating the trigger gun. Always use two hands to grip the gun
firmly before pressing the trigger.
Only press the switch once the high pressure hose is tightly fixed.
Always wear protective clothing, gloves and safety goggles. Do not operate barefoot or in sandals.
Advertisement
