Advertisement
Using the preparation beakers and serving beakers
● Place ingredients in the large or small preparation beaker or in
one of the serving beakers.
● Screw one of the blade units onto the beaker.
● Place the beaker on the drive shaft on the base unit, so the pins
on the beaker are lined up with the depressions in the base unit.
● Hold the base unit down with one hand and press down on the
beaker with the other hand.
● The motor runs as long as you press the beaker down. You can
also get the motor to run continuously by pressing the beaker
down and turning it slightly in a clockwise direction
Using the Blender Beaker
● Screw the blade unit with the coarse blade onto the blender
beaker.
● Place the food in the blender beaker.
Place the lid (2) on the blender beaker, and turn it in a clockwise
●
direction unit it clicks into place.
● Place the cap (3) in the hole in the blender beaker lid, so the
pins on the cap fit into the holes in the lid. Turn the cap slightly in
a clockwise direction until it clicks into place.
● Place the blender beaker on the drive shaft on the motor unit, so
the pins on the beaker are lined up with the depressions in the
base unit.
● Start the mixer as described above.
If you want to add more ingredients as you go along, you can
remove the cap from the lid by turning it anticlockwise and lifting it
up. Stop the mixer before removing the cap to avoid splashes.
If you need to scrape inside or empty the blender beaker, wait until
the blade has stopped completely before you remove the lid!
Never use your fingers to scrape.
4
Advertisement
