Enjoying Video Sources; Listening To The Radio; Automatic/Manual Tuning; To Preset Stations - Hitachi DV-S522U Instruction Manual

Hitachi instruction manual dvd home theater system dv-s522u

Hide thumbs Also See for DV-S522U:

Supplementary manual (1 page)

Table Of Contents

Table of Contents

1. Press [SOURCE] to select "VIDEO 1" or "VIDEO 2".

To turn the unit on and listen to the last received station, press

[TU/BAND] on the remote control.

Automatic/Manual Tuning

1. Press [SOURCE] (or [TU/BAND] on the remote control) to

select FM or AM.

2. Automatic tuning

Press [e/TUNE+] or [f/TUNE -] (or [NEXT/TUNE+] or

[PREV/-TUNE] on the remote control) for at least 1 second to

tune in a station. The unit will scan up or down the band and

receive the next receivable station. Press the button again to

continue.

Manual tuning

Press [e/TUNE+] or [f/TUNE -] (or [NEXT/TUNE+] or

[PREV/-TUNE] on the remote control) briefly until the desired

frequency is displayed.

To Preset Stations

Up to 20 FM and 10 AM stations can be preset.

Automatic presetting (APT)

1. Press [SOURCE] (or [TU/BAND] on the remote control) to

select FM or AM.

2. Press [c/MEMO] for at least 3 seconds.

"PROG." blinks.

The automatic tuning mode is set and automatic presetting

begins from the low end of the band.

When 20 FM or 10 AM stations have been preset or the high

end of the band is reached, automatic presetting stops.

"PROG." disappears and the station memorized on channel

1 will be heard.

3. To preset stations on the other band, follow steps above.

Note:

If APT is activated, all previously programmed stations of the

band will be cleared and new stations will be programmed.