Conventional Tv Connections - Hitachi DV-S522U Instruction Manual

Conventional TV Connections

Using MONITOR OUT VIDEO jack
Connect the Video cable with yellow connectors (supplied)
between the MONITOR OUT VIDEO jack of the unit and the
VIDEO INPUT jack on the TV.
VIDEO 1
ANT
VIDEO IN
FM
75
AUDIO IN
AM
LOOP
Notes:
• Please refer to the instruction manual of your TV.
• When you connect the unit to your TV, be sure to turn off the
power and disconnect both units from the wall outlet until all
the connections have been made.
• Do not connect the MONITOR OUT (S-VIDEO/VIDEO) and
COMPONENT VIDEO OUT jacks of the unit to a VCR directly.
The playback picture will be distorted because DVD video
discs are copy protected.
Using MONITOR OUT S-VIDEO jack
Note:
Please follow the steps before turn on the power.
1. If your TV has the S-VIDEO INPUT jack, connect the
*Super-Video cable (not supplied) between the MONITOR
OUT S-VIDEO jack of the unit and the S-VIDEO INPUT jack
of the TV. (The MONITOR VIDEO OUT jack connection is
not necessary.)
You can enjoy clearer picture playback.
2. Set the VIDEO OUT SELECT switch to the S-VIDEO position.
Partial back panel
MONITOR OUT
VIDEO OUT SELECT
(DVD ONLY)
S-VIDEO VIDEO
(DVD ONLY)
COMPONENT S-VIDEO
2
VIDEO OUT
SCAN SELECT
SELECTABLE INTERLACE
R L CENTER
FRONT
SPEAKERS 8 1
*Super-Video cable (not supplied)
*Please consult your local audio/video dealer.
Note:
When watching VCR, you must connect the Video cable between the MONITOR OUT VIDEO jack of the unit and the VIDEO INPUT jack
of the TV. There are no VCR video signals from S-VIDEO OUT and COMPONENT VIDEO OUT jacks of the unit.
To MONITOR OUT VIDEO (Yellow)
VIDEO 2 COMPONENT
VIDEO OUT SELECT
VIDEO OUT
(DVD ONLY)
VIDEO OUT VIDEO IN
(DVD ONLY)
Y
COMPONENT S-VIDEO
C /P
B B
AUDIO OUT AUDIO IN
L L
C /P
R R
VIDEO OUT
SCAN SELECT
SELECTABLE INTERLACE
R R
Partial back panel
TV with S-VIDEO INPUT jack
S-VIDEO IN 1
AUDIO
OUTPUT
AUDIO
R-AUDIO-L VIDEO
VIDEO
INPUT
1
AUDIO
VIDEO
R L SUB WOOFER
INPUT
SURROUND
R-AUDIO-L VIDEO
2
Important Information:
To connect the unit to a TV, TV must have a Video input jack
(RCA-type) at least. You cannot connect it to an antenna
terminal of TV.
Video cable (supplied)
MONITOR OUT
S-VIDEO VIDEO
R L CENTER R L SUB WOOFER
FRONT SURROUND
SPEAKERS 8
Using COMPONENT VIDEO OUT jacks
Note:
Please follow the steps before turn on the power.
1. If your TV has the COMPONENT VIDEO INPUT jacks,
connect the *Component Video cable (not supplied) between
the COMPONENT VIDEO OUT jacks of the unit and the
COMPONENT VIDEO INPUT jacks of the TV.
(The MONITOR VIDEO OUT or S-VIDEO OUT jack
connection is not necessary.)
You can enjoy high quality picture playback.
2. Set the VIDEO OUT SELECT switch to the COMPONENT
position.
3. Set the VIDEO OUT SCAN SELECT switch to the
INTERLACE position.
Partial back panel
VIDEO 1 VIDEO 2 COMPONENT
VIDEO OUT
VIDEO IN VIDEO OUT VIDEO IN
Y
Green
C /P
B
AUDIO IN AUDIO OUT AUDIO IN
L L L
C /P
R
R Blue R
R
Red
*Component Video cable (not supplied)
*Please consult your local audio/video dealer.
-E10-
S-VIDEO IN 1
AUDIO
OUTPUT
AUDIO
R-AUDIO-L VIDEO
VIDEO
L
INPUT
1
AUDIO
VIDEO R
INPUT
R-AUDIO-L VIDEO
2
TV's back panel
TV with COMPONENT
VIDEO INPUT jacks
MONITOR OUT
VIDEO OUT SELECT
(DVD ONLY)
S-VIDEO VIDEO
(DVD ONLY)
COMPONENT S-VIDEO
COMPONENT VIDEO INPUT
B
2
Y
R
VIDEO OUT
SCAN SELECT
SELECTABLE INTERLACE
R L CENTER
3
FRONT
SPEAKERS 8
Green
1
To VIDEO
INPUT
CB CR
R L SUB WOOFER
SURROUND
Blue
Red