Before Operation; Common Operation - Hitachi DV-S522U Instruction Manual

Hitachi instruction manual dvd home theater system dv-s522u

Hide thumbs Also See for DV-S522U:

Supplementary manual (1 page)

Table Of Contents

Table of Contents

Common Operation

POWER/STANDBY z/ I

POWER/STANDBY

PHONES

Turning the power on and off

Press [POWER/STANDBY] (or [z/I] on the remote control). The

STANDBY indicator goes out. (After connecting the power cord,

when you press [POWER/STANDBY] (or [z/I] on the remote

control) for the first time, the volume-reset feature automatically

sets the initial volume level.)

To turn the power off, press [POWER/STANDBY] (or [z/I] on the

remote control) again. The STANDBY indicator lights.

•

When the power cord is connected to the AC outlet, the unit

will respond to commands from the remote control.

Smart start function

If the following buttons are pressed when the power is turned

off, the unit turns on automatically and the selected source is

activated.

[qOPEN/CLOSE], [a] (Front panel of the unit)

[a], [TU/BAND] (Remote control)

Selecting the source

Press [SOURCE] to select the desired source. Each time the

button is pressed, the display changes as follows:

DVD

VIDEO 1

VIDEO 2

•

When the source selection is changed, disc playback

automatically stops.

Adjusting the volume

Rotate [VOLUME] (or press [VOLUME] o or p on the remote

control). The volume level appears on the display (VOL 0 ~ VOL

MAX).

To reduce the volume temporarily (muting)

Press [MUTE] on the remote control.

(The volume control illumination blinks.)

To restore the previous volume setting, press [MUTE] again.