Cpu Contacts - Nikon Nikkor AF‑S NIKKOR 70‑200mm f/4G ED VR User Manual

Lens Care
■
• Do not pick up or hold the lens or camera using only the lens hood.
• Keep the CPU contacts clean.
En
• Should the rubber lens‑mount gasket be damaged, cease use
immediately and take the lens to a Nikon‑authorized service center for
repair.
• Use a blower to remove dust and lint from the lens surfaces. To remove
smudges and fingerprints, apply a small amount of ethanol or lens
cleaner to a soft, clean cotton cloth or lens‑cleaning tissue and clean
from the center outwards using a circular motion, taking care not to
leave smears or touch the glass with your fingers.
• Never use organic solvents such as paint thinner or benzene to clean
the lens.
• The lens hood or NC filters can be used to protect the front lens
element.
• Attach the front and rear caps before placing the lens in its flexible
pouch.
• If the lens will not be used for an extended period, store it in a cool, dry
location to prevent mold and rust. Do not store in direct sunlight or
with naphtha or camphor moth balls.
• Keep the lens dry. Rusting of the internal mechanism can cause
irreparable damage.
• Leaving the lens in extremely hot locations could damage or warp parts
made from reinforced plastic.
Supplied Accessories
■
•  mm snap‑on Front Lens Cap LC‑
• Rear Lens Cap LF‑
• Bayonet Hood HB‑0
• Flexible Lens Pouch CL‑122
Compatible Accessories
■
•  mm screw‑on filters
• Tripod collar ring RT‑1
AF‑I/AF‑S Teleconverters TC‑1E/TC‑1E II/TC‑1E II */TC‑20E */
•
TC‑20E II */TC‑20E III *
* Autofocus is available only with cameras that offer f/8 support.
20