Advertisement
ACTIVATE THE GPS ANTI-THEFT
PROTECTION AREA
Before the anti-theft protection area can be activated, a SIM card must be installed and the administra-
tor's phone number must be entered into the GPS communication unit. Read the "Before use" section.
1.
Place Automower
middle of the lawn Automower
under trees, roofs or close to a house, as this weakens the GPS signal.
2.
Set the main switch to the ON position.
3.
Go to the mower's Security menu, enter your PIN code and press YES. Place
the cursor at GPS and press YES. Select ON to activate and press YES. Make
sure that Alarm and Time lock are activated for total functionality. The GPS
unit now automatically indexes the position as the central point.
4.
Leave the mower in the same position until the GPS unit confirms the
central point by sending an SMS containing the GPS coordinates for the
central point. This can take up to 15 minutes.
5.
Automower
100 metres from the central point. If the mower is moved outside the pro-
tection area, an alarm is triggered and the GPS communication unit sends
an SMS alert message to the designated phone numbers. The radius can be
increased if required.
6.
You can deactivate the GPS anti-theft protection at any time by going to the
mower's Security menu, entering your PIN code and deactivating the GPS.
This may be of use, when the mower for instance must be transported to
your dealer for a winter service.
at the centre of the required protection area (often in the
®
has now an activated circular protection area with a radius of
®
is going to mow). Avoid placing Automower
®
®
Advertisement
