Download Print this page

Husqvarna GPS COMMUNICATION User Manual page 4

Gps communication

Advertisement

SMS FEATURE
In cases where a message is displayed in the mower display (if the mower for instance gets
stuck in a tree branch that has blown down), the GPS communication unit will send an
SMS message. The SMS describes in general terms what has happened, while the message
in the mower display offers a more detailed description of the cause of the stoppage. An
SMS is normally sent about 15 minutes after a message is shown in the mower display.
It is also possible to communicate with the mower. The following SMS can be sent to
Automower
to change settings or enquire of settings and status.
®
The commands that start with the letter S (Set) change a setting and commands beginning
with an R (Read) read settings or status.
Important information
It is important to write the messages exactly as outlined in the tables, with spaces,
dots and colons in the correct manner. All commands are confirmed by Automower
sending back an SMS.
Description
Send the mower to the charging station.
Start mowing
Set timer 1 *
Set timer 2 *
Set weekend timer 1 *
Set weekend timer 2 *
Set week timer **
Read status
Read timer
Read weekend timer
Read week timer
* hh=hours, mm=minutes. See the Automower
functions.
** Enter on/off for all the days of the week, Monday to Sunday. e.g. Swt On-Off-On-Off-On-Off-Off
results in Automower
®
mowing Monday, Wednesday and Friday. It will not mow on the other days.
Command
Shm
Sst
St1 hh:mm-hh:mm
St2 hh:mm-hh:mm
Swet1 hh:mm-hh:mm
Swet2 hh:mm-hh:mm
Swt On-Off-On-Off-On-Off-Off
Rst
Rtr
Rwetr
Rwt
Operator's Manual for more information about the timer
®
®

Advertisement

loading

This manual is also suitable for:

Automower