Download Print this page

Husqvarna GPS COMMUNICATION User Manual page 7

Gps communication

Advertisement

SMS feature
Send the mower to the charging
station.
Start mowing
Set timer 1
Set timer 2
Set weekend timer 1
Set weekend timer 2
Set week timer
Read status
Read timer
Read weekend timer
Read week timer
EXAMPLE - SMS FEATURE
If one wishes remotely to send the mower to the charging station (if it is not already there)
and leave it there, an SMS with the
mand can be sent to the GPS communication unit.
Send an SMS with the
at any particular time. The GPS communication unit answers by sending an SMS with a
Cutting, Charging, Timer or Stopped message.
EXAMPLE - GPS ANTI-THEFT PROTECTION
AREA
If the mower is moved outside the protection area, the GPS communication unit sends
an SMS alert message. The first SMS is sent to all registered users. After this, only the ad-
ministrator receives updated positioning information. If the mower stops moving an SMS
alert message is sent. To save energy, an SMS will be sent only if the mower begins to move
again. All users are notified when the mower enters the anti-theft protection area again.
SMS's cannot be sent to the mower while it is located outside the anti-theft protection
area. This is to lower energy usage so that the GPS communication unit can send new posi-
tion notifications as long as possible.
Shm
(Send the mower to the charging station) com-
Rst
(Read status) command to find out what the mower is doing
Shm
Sst
St1 hh:mm-hh:mm
St2 hh:mm-hh:mm
Swet1 hh:mm-hh:mm
Swet2 hh:mm-hh:mm
Swt On-Off-On-Off-On-Off-Off
Rst
09 02 10
N L
Rtr
Rwetr
Rwt
Logotyp automover

Advertisement

loading

This manual is also suitable for:

Automower