Check the supplied accessories before installation.
In case of missing or damaged, please contact the dealer immediately.
Remote control Batteries Installation
Slide open the battery compartment cover in the direction of the arrow.
Insert two AAA batteries. Make sure the polarities match the indication
inside the battery compartment.
Slide to close the battery compartment cover until it
Do not insert batteries with '+' and '-' polarities reversed as this may cause the batteries to swell or rupture resulting in leakage.
Never mix used and new batteries in the device.
Replace all the batteries in the device at the same time.
Remove the batteries if the remote control is not going to be used for an extended period of time.
Using the remote control
Point the remote control directly at your TV, within a 30° angle horizontally (15° to either side), and within 30° vertically of the
remote control sensor on the front of your TV and within 26.25 feet (8 m) of your TV.
Do not expose the remote control to liquids, direct sunlight, or shock. Do not mix batteries of different types.
Objects between the remote control and the remote control sensor may block the remote control signal.
The range of the remote control may be diminished if direct sunlight or other strong light is shining on the remote control sensor. In this case,
change the angle of the lighting, move your TV, or operate the remote control closer to the remote control sensor.
Two AAA Batteries