Download  Print this page

Changing Channels; Using The On-Screen Menus; Memorizing Channels - Hitachi L32A102 User Manual

Lcd color television
Hide thumbs

Advertisement

Cable-Cable TV channels.
4 Press MENU one or more times to close
the menu.

Changing channels

To change channels:
Press the CH+ or CH- on the side of your TV
or the CH
control.
To enter a channel number directly:
Press the number buttons on the remote
control.
In digital TV mode, a main (major) channel
can have one or more sub. (minor) channels.
Press the number buttons to enter the main
channel, press the – button (to the left of the 0
button), then press the number button for the
sub-channel. For example, if you want to
watch channel 5-2, press 5, press the –
button, then press 2.
To go to the previous channel:
Press LAST CH.

Using the on-screen menus

Use your remote control to navigate in the
on-screen menus.
To use the on-screen menus:
1 Press INPUT on the remote control to select
the video source.
2 Press MENU on the remote control. The
on-screen menu appears.
/
3 Press
Channel, Timers, Locks, or Setup icon,
then press
4 Press
/
to highlight a setting, then press
/
to change the setting.
5 Press MENU one or more times to close the
menu.
Scanning Channels
To select channels with the CH buttons, your TV
first needs to scan the channels. When your TV
scans channels, it scans for channels with
signals, then stores the channel information into
memory.
To automatically scan channels:
1 Press MENU on the remote control, then
/
press
to highlight Channel icon. The
Channel menu opens.
Channel
TV Source
Auto Scan
Favorites
List
Channel No.
Channel Label
DTV Signal
Move
Select
or CH
on the remote
to highlight the Video, Audio,
to enter the menu.
Cable
1-2
Sencore
Strong
MENU
Return
2 Press
to enter the Channel menu.
3 Press
/
to select Auto Scan, then
press
. The Auto Scan sub-menu opens.
Channel
Scan All
Digital Channels
Analog Channels
Move
/
4 Press
to select the type of auto scan
you want:
Scan all
Digital Channels
Analog Channels
Then press
to start the auto scan. Your
TV scans for and memorizes all channels
available in your area.
5 To stop the auto search, press MENU.
When auto search is finished, the channel
changes to the first channel in the memorized
channel list.
Note
The Channel List cannot be updated by only
changing the cable source. Auto Scan must be
performed for the Channel List to be updated.
IMPORTANT NOTICE
United States federal law requires broadcasters to stop transmitting
analog (non-digital) television signals after February 17, 2009.
Accordingly, this TV's analog tuner will not be capable of receiving
over-the-air analog television broadcasts after such analog
broadcasts are no longer available.
After February 17, 2009, this TV's analog tuner will continue to
work with compatible cable and satellite TV systems, gaming
consoles, VCRs, DVD players and other similar products.
Both before and after February 17, 2009, this TV's digital tuner will
receive available over-the-air digital television broadcasts using an
antenna and other digital television broadcasts using compatible
cable, satellite or other digital television system connections.
Please review this Operating Guide for further information
regarding such connections.
Hitachi supports the DTV transition and as a member of the DTV
Transition Coalition urges consumers to visit these web sites for
interactive guides and further detailed information:
www.dtvtransition.org
www.myceknowhow.com
Select
MENU
Return
www.dtv2009.gov
www.youtube.com
13

Advertisement

Table of Contents
loading

  Related Manuals for Hitachi L32A102

This manual is also suitable for:

L32a102g