After completing any service or repair to this TV, ask the service
technician to perform routine safety checks to determine that
your TV is in correct operating condition.
Operate your TV only from the type of power source indicated
on the marking label. If you are not sure of the type of power
supplied to your home, consult your TV dealer or local power
The power cord is used as the disconnect device and shall
remain readily operable.
To reduce the risk of electric shock, do not remove
the cover or back. There are no user-serviceable
parts inside. Refer servicing to qualified service
personnel.To reduce the risk of fire or electric
shock, do not expose your TV to rain or moisture.
To prevent electric shock, match the wide blade on the power
cord plug to the wide slot on an electric outlet. If the plug does
not fit, consult a licensed electrician to replace the obsolete
outlet. Do not modify the power cord plug, or you will defeat
this safety feature.
To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture.
The LCD television should not be exposed to dripping or
splashing and objects filled with liquids, such as vases,
should not be placed on the television.
This apparatus shall be connected to a mains socket
outlet with a protective earthing connection.
This product contains lead and one or more
non-replaceable mercury backlights. Do not put in
trash. Recycle or dispose of according to applicable
laws. For product recycling and disposal information,
contact your local government agency or visit
www.eiae.org (in USA) or www.epsc.ca (in Canada).
FOR MORE INFORMATION, CALL 800-HITACHI.
Public viewing of copyrighted material
Public viewing of programs broadcast by TV stations and cable
companies, as well as programs from other sources, may
require prior authorization from the broadcaster or owner of the
video program material.
This product incorporates copyright protection technology that is
protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized ,
and is intended for home and other limited consumer uses
only unless otherwise authorized. Reverse engineering or
disassembly is prohibited.
FEDERAL COMMUNICATIONS COMMISSION NOTICE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one
or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions :
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
For questions regarding this declaration, contact:
Hitachi Home Electronics (America), Inc.
900 Hitachi Way
Chula Vista, CA 91914-3556
ATTN: Customer Relations
The FCC requires the user to be notified that any changes or
modifications made to this device that are not expressly approved
by Hitachi Home Electronics (America), Inc, may void the user's
authority to operate the equipment.
Connections to this device must be made with shielded cables
with metallic RFI/EMI connector hoods to maintain compliance
with FCC Rules and Regulations.
Any cables that are supplied with the system must be replaced
with identical cables in order to assure compliance with FCC rules.
Order Hitachi spares as replacement cables.