Subscribe to Our Youtube Channel
Related Manuals for EMP Tek 41-SE
Summary of Contents for EMP Tek 41-SE
- Page 1 B E RY L L I U M C O N E S P E A K E R S 41-SE/B Model BERYLLIUM CONE SPEAKERS OW N ER’S M A N UA L...
- Page 2 Introduction Congratulations on your purchase of EMP Tek 41-SE/B speakers! Your speakers are the result of many years of research and development dedicated to producing high quality products for home audio systems. This manual contains features, setup recommendations and specifications for the EMP Tek 41-SE/B speakers.
- Page 3 To clean dust from the grille cloth, use a vacuum with a brush attachment. Features At the heart of the EMP Tek 41-SE/B speakers are proprietary beryllium cone woofers. The special beryllium cone material combines stiffness, low mass and self damping properties in a manner that allows virtually uncolored presentation of program material.
- Page 4 Attaching Speaker Wires (continued) Room Setup Suggestions In order to obtain the best possible sound from your speaker system, it is important to determine where the speakers will sound best in your listening room. Room reflections from the floor, ceiling and side walls influence the balance, imaging and overall sonic quality at the listening position.
- Page 5 Room Setup Suggestions (continued) Rear Surround Speakers (continued) For best performance, you may want to experiment with angling the surround speakers either towards or away from the listening position. Subwoofer Placement of the subwoofer will largely determine quality, quantity, and extension of the bass frequencies within your listening room.
- Page 6 Specifications Model 41-SE/B Speaker Type Bookshelf -way Bass Reflex Frequency Response: 0Hz – 0kHz ±dB Sensitivity: 88dB (.8V @ 1M) Recommended Power: 0-100 Watts Woofer: (1) 4” (10mm) Beryllium Cone Tweeter: (1) 1” (5mm) Silk Dome Impedance: 8 Ohm Crossover Frequencies:...
- Page 7 EMP Tek, along with the original sales invoice or other proof of purchase, which establishes eligibility for warranty service. EMP Tek will, at its option, replace or repair the product free of charge and return the product by prepaid delivery.
- Page 8 382 Marshall Way, Layton, Utah • USA • 84041 Toll Free: (801) 991-1308 • Fax: (801) 543-3300 www.emptek.com It is EMP Tek policy to continuously incorporate improvements into products; all specifications are subject to change without notice. Copyright © 2009 EMP Tek. All Rights Reserved.
Need help?
Do you have a question about the 41-SE and is the answer not in the manual?
Questions and answers