Table of Contents
Advertisement
HOW TO SETUP YOUR NEW HITACHI PLASMA TELEVISION
SPEAKER INSTALLATION 42"
1.
Screw the speaker holder to the speakers as shown below.
Speaker Holder
Screw x2
(R)
Speaker
Holder
Screw x2
2.
Loosen 4 screws (A) (two on the left and two on the right).
3.
Completely unscrew 4 screws (B) (two on the left and two on
the right).
4.
Hook the speaker holders to the loosened screws (A).
5.
Screw the speaker holders to the Display Monitor with
screws (B).
6.
Tighten screws (A).
(R) Speaker
Loosen
Screw
(A)
Bottom View
of Speaker
Holder
Hook this
portion to the
loose screws
(A).
7.
Connect the speaker wires as shown below. (Make sure the
core is toward the display monitor side.)
Core
NOTES:
Do not connect speakers simultaneously to the speaker terminal of the Plasma TV and an external amplifier.
(R)
(L)
Unscrew (B)
Completely
Insert
horizontally from
the side
Screw in
screws (B)
SPEAKER INSTALLATION 50"
1.
Screw the speaker holder to the speakers as shown below.
Speaker Holder
(R)
Speaker Holder
2.
Screw in screw (C).
3.
Hook the upper speaker holder to the screw in (C).
4.
Screw in the lower speaker holder (D).
5.
Tighten screws (C) and (D).
Screw in
screws (D)
6.
Connect the speaker wires as shown below. (Make sure the
core is toward the display monitor side.)
Ferrite Core
5
Screw x2
(R)
(L)
Screw x2
Screw in
screws (C)
Advertisement
Table of Contents
